The Q1 is a passive 2-way loudspeaker housing two 10" LF drivers positioned in a dipolar arrangement and a 1.3" HF compression driver fitted to a toroidal waveshaping device. The 75° constant directivity horizontal dispersion pattern is maintained down to 400 Hz, while the vertical HF dispersion of 15° allows the Q1 to be used to construct vertical columns that produce a curved coherent wavefront. The mechanical and acoustical design of the cabinet enables vertical splay angles to be set between 0° and 14°. Q1 cabinets can therefore be used in vertical configurations starting from two cabinets with a 15° to 30° dispersion, up to 20 cabinets with a fully user and venue defined vertical profile. The Q1 cabinet is constructed from marine plywood, incorporates a pair of handles and has an impact resistant paint finish. The front of the loudspeaker is protected by a rigid metal grill covered with replaceable acoustically transparent foam, and two EP5 or NL4 connectors wired in parallel are mounted on the rear panel.
The d&b audiotechnik loudspeaker range is designed exclusively for operation with d&b amplifiers. These provide power as well as comprehensive control and protection functions tailored to achieve the performance, reliability and longevity associated with the d&b System approach. The d&b D20 and 30D amplifiers are recommended to drive the Q1. The d&b D80, 10D, D6 and D12 amplifiers can also be used with the appropriate loudspeaker configuration selected.
|组成部分||2 x 10" 低频驱动单元/1.3" 高频压缩驱动单元|
135 dB SPL
139 dB SPL
139 dB SPL
|额定功率(RMS/峰值 10 ms)||400/1600 瓦|
|频率响应 (-5 dB)||60/1002 Hz - 17 kHz|
|指向特性 (水平 x 垂直)||75° x 15°3|
|尺寸 毫米 (高 x 宽 x 深)||308 x 580 x 410|
|尺寸 英寸 (高 x 宽 x 深)||12.1 x 22.8 x 16.1|