The Q10 is a 110° x 40° passive 2-way loudspeaker housing two 10" LF drivers and a 1.3" HF compression driver with a rotatable constant directivity horn and a passive crossover network. The two 10" neodymium LF drivers are positioned in a dipolar arrangement providing exceptional vertical dispersion control with the nominal angle being maintained down to 400 Hz. The Q10 can be used as a stand-alone full range system or in combination with other Q-Series cabinets ground stacked or mounted on a high stand with the Q Flying bracket. When used in the upright configuration it has a very accurate 110° horizontal constant directivity behaviour that is maintained down to approximately 800 Hz. Its wide constant directivity performance provides remarkable transparency when used in close proximity to listeners. It is also ideally suited to ambient and / or distributed sound reinforcement tasks where orientation within the sound field is critical. The Q10 cabinet is constructed from marine plywood and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill, covered with a replaceable acoustically transparent foam. The cabinet incorporates a pair of handles and mounted on the rear panel are two EP5 or NL4 connectors wired in parallel.
The d&b audiotechnik loudspeaker range is designed exclusively for operation with d&b amplifiers. These provide power as well as comprehensive control and protection functions tailored to achieve the performance, reliability and longevity associated with the d&b System approach. The d&b D20 and 30D amplifiers are recommended to drive the Q10. The d&b D80, 10D, D6 and D12 amplifiers can also be used with the appropriate loudspeaker configuration selected.
|组成部分||2 x 10" 低频驱动单元/1.3" 高频压缩驱动单元|
133 dB SPL
137 dB SPL
137 dB SPL
|额定功率 (RMS/峰值 10 ms)||400/1600 瓦|
|频率响应 (-5 dB)||60/1002 Hz - 17 kHz|
|指向特性 (水平 x 垂直)||110° x 40°34 CD|
|尺寸 毫米 (高 x 宽 x 深)||580 x 308 x 410|
|尺寸 英寸 (高 x 宽 x 深)||22.8 x 12.1 x 16.1|