 |
|
| D6 Data (linear setting with subsonic filter) |
 |
| Rated output power (THD+N < 0.1%) |
2 x 350 W into 8 Ω, both channels are driven |
| |
2 x 600 W into 4 Ω, both channels are driven |
|
| S/N ratio (unweighted, RMS) |
> 110 dBr |
|
| |
| D6 Connectors |
|
| INPUT/LINK ANALOG A/B |
3 pin XLR female/male |
|
| INPUT/LINK DIGITAL AES/EBU |
3 pin XLR female/male |
|
| Sampling rate |
48 kHz / 96 kHz |
|
| OUT CHANNEL A/B |
NL4 |
|
| REMOTE |
2 x RJ 45 parallel |
|
| SERVICE |
USB Type B |
|
| |
| D6 Digital Signal Processing |
|
| Sampling rate |
96 kHz / 27 Bit ADC / 24 Bit DAC |
|
| Basic delay / latency analog input |
0.3 ms |
|
| |
| D6 Power supply |
|
| Autosensing switch mode power supply for |
100/115/200/230V, 50 - 60 Hz |
|
| Mains connector |
PowerCon®  |
|
| |
| D6 Remote network |
|
| Remote network |
CAN-Bus |
|
| |
| D6 Dimensions, weight |
|
| Height x width x depth |
2 RU x 19" x 353 mm / 13.9" |
|
| Weight |
8 kg / 17.6 lb |
|
 |
| PowerCon® is a registered trademark of the
Neutrik AG, Liechtenstein |
|
|
We reserve the right to make
any necessary changes to the products and the published specification. As part of our
ongoing product development program we try, where possible, to maintain the highest
degree of product compatibility.
|
D6 Hardware manual 1.6
