Qi1 loudspeaker
The Qi1 is the installation version of the Q1 line array loudspeaker. It is acoustically compatible with the standard road version differing only in cabinet construction and mounting hardware. The Qi1 cabinet is a passive 2-way design that houses 2 x 10" LF drivers and a 1.3" HF compression driver with a toroidal wave shaping device to achieve a 75° x 15° (h x v) dispersion characteristic. The two 10" neodymium LF drivers are positioned in a dipolar arrangement providing an exceptional dispersion control. The Qi1 cabinet is constructed from marine plywood and has an impact resistant paint finish. The front of the loudspeaker cabinet is covered with a replaceable acoustically transparent foam that is then protected by a rigid metal grill. Four M10 threaded inserts on each side panel of the cabinet enclosure are provided for attaching installation hardware. The cabinet rear panel is fitted with two NL4 connectors wired in parallel. The loudspeaker cabinet is also available in Special Colour (SC) and Weather Resistant (WR) options.
Amplifiers
The Qi1 can be driven either by the d&b D6 or D12 dual channel power amplifiers configured for the Q1. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.
Applications
| Live music |    |
| Playback | |
| Speech | |
| Stage monitor | |
| Subwoofer |
Data
| Components | 2 x 10" driver / 1.3" compression driver |
Max. sound pressure (1m, free field) with D6 / D12 |
135 / 139 dB SPL |
| Power handling capacity (RMS / peak 10 ms) | 400 / 1600 W |
| Frequency response (-5 dB) | 60 / 100 Hz - 17 kHz |
| Nominal dispersion angle (h x v) | 75° x 15° |
| Cabinets per channel D6 / D12 | 2 / 2 |
| Dimensions mm (H x W x D) | 308 x 580 x 410 |
| Weight kg | 21 |
| Dimensions inch (H x W x D) | 12.1 x 22.8 x 16.1 |
| Weight lb | 46 |
Application information is presented for guidance only. We reserve the right to make any necessary changes to the products and the published specification. As part of our ongoing product development program we try, where possible, to maintain the highest degree of product compatibility.
|
recommended use |
|
with subwoofer |
|
from 2 up to 9 as array |
|
SPL max peak test signal: pink noise with crest factor 4 |
|
standard/CUT mode |
|
≥ 400 Hz in dipolar direction |
|
in applications with low continuous levels or low ambient temperatures up to three loudspeakers per channel D12 may be connected |
Downloads
Documentation
| Title | Language | Date | Size |
|---|---|---|---|
| Declaration of Conformity Loudspeaker/Amplifiers (CE) | Int | 13.03.12 | 34 kB |
| Qi1 Manual 1.3 | English | 04.08.10 | 143 kB |
| The Q-Series brochure | English | 15.02.12 | 9242 kB |
| TI 350 Q-Series system design and Q-Calc | English | 02.06.06 | 578 kB |
| TI 385 d&b Line array design, ArrayCalc V6.7 | English | 03.04.12 | 3667 kB |
Order form for printed documentation from d&b.
Accessories
Available PDF documents for the accessories can be found in the table below the images.
 |
 |
 |
| Z5145 Ci/Qi Mounting frame |
Z5170 Qi Mounting adapter |
Z5171 Qi Mounting plate |
 |
 |
 |
| Z5160 Q Load adapter |
Z5147 Rota clamp |
Z5155 Q Hoist connector chain |
| Title | Language | Date | Size |
|---|---|---|---|
| Qi Mounting system, Mounting instructions 2.0 | Int | 06.06.05 | 281 kB |
| Z5147 Rota Clamp, Mounting instructions | English | 05.12.06 | 447 kB |
| Z5160 Load adapter, Mounting instructions 1.1 | English | 05.08.11 | 381 kB |
FAQs
Please find the specified FAQs here.
