Ti subwoofer
The Ti-SUB is the installation version of the T-SUB and only differs to the road version in the mounting hardware and cabinet details. It can be used to supplement the LF headroom of the Ti10L and Ti10P cabinets in various configurations. The Ti subwoofer cabinet is an actively driven bass-reflex design housing a long excursion 15" driver with a neodymium magnet. The cabinets are mechanically connected using rigging links on both sides of the cabinet front which slide out when needed, and with a central splay link at the rear of the cabinet. All necessary rigging components are mounted to the cabinet. The Ti-SUB can also supplement the Ti10 loudspeakers in ground stacked applications where the Ti-SUB can mechanically support them. The Ti-SUB cabinet is constructed from marine plywood and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill in front of an acoustically transparent foam. Mounted on the rear panel are two NL4 connectors wired in parallel. The loudspeaker cabinet is also available in Special Colour (SC) and Weather Resistant (WR) options.
Amplifiers
The Ti-SUB can be driven either by the d&b D6 or D12 dual channel power amplifiers configured for the T-SUB. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.
Applications
| Live music | |
| Playback | |
| Speech | |
| Stage monitor | |
| Subwoofer |  |
Data
| Components | 15" driver |
Max. sound pressure (1m, free field) with D6 / D12 |
127 / 130 dB SPL |
| Power handling capacity (RMS / peak 10 ms) | 300 / 1600 W |
| Frequency response (-5 dB) | 47 Hz - 140 / 100 Hz |
| Cabinets per channel D6 / D12 | 2 |
| Dimensions mm (H x W x D) | 431 x 470 x 400 |
| Weight kg | 17 |
| Dimensions inch (H x W x D) | 17.0 x 18.5 x 15.8 |
| Weight lb | 37 |
Application information is presented for guidance only. We reserve the right to make any necessary changes to the products and the published specification. As part of our ongoing product development program we try, where possible, to maintain the highest degree of product compatibility.
|
recommended use |
|
SPL max peak test signal: pink noise with crest factor 4 |
|
100 Hz mode |
Downloads
Documentation
| Title | Language | Date | Size |
|---|---|---|---|
| Declaration of Conformity Loudspeaker/Amplifiers (CE) | Int | 13.03.12 | 34 kB |
| The T-Series brochure | English | 31.03.12 | 3187 kB |
| Ti-SUB Manual 1.0 | English | 02.06.09 | 122 kB |
Order form for printed documentation from d&b.
Accessories
Available PDF documents for the accessories can be found in the table below the images.
 |
 |
|
| Z5370 T Flying frame |
Z5147 Rota clamp |
| Title | Language | Date | Size |
|---|---|---|---|
| Z5147 Rota Clamp, Mounting instructions | English | 05.12.06 | 447 kB |
