---

---

Ti10P loudspeaker

The Ti10P loudspeaker is the installation version of the T10 for deployment as a point source loudspeaker. Road and installation version differ only in the mounting hardware. The Ti10P cabinet is a passive 2-way design that houses 2 x 6.5" drivers, a 1.4" exit HF compression driver and can be used either in horizontal or vertical orientation. The very compact loudspeaker design is a unique combination of a rotatable waveguide with horn and an acoustic lens. The horn can easily be rotated from outside the loudspeaker without tools or removing the front grill. This is achieved through apertures at the cabinet sides which allow rotation to both vertical or horizontal setup. It provides a vertical line source with a 90° horizontal dispersion that is maintained down to approximately 600 Hz, whilst the integrated lens in the front grill widens the HF dispersion in horizontal setup to 105°. When the loudspeaker is used upright, the lens curves the wave front of the line source providing a 90° x 35° dispersion pattern. The two 6.5" neodymium LF drivers are positioned in a dipolar arrangement providing an exceptional dispersion control even at lower frequencies. The Ti10P cabinet is constructed from polyurethane integral hard foam with an impact resistant finish and has integrated threads for attaching installation hardware. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Mounted on the rear panel are two NL4 connectors wired in parallel. Special colour (SC) or weather resistant (WR) versions are available.

---

Amplifiers

The Ti10P can be driven either by the d&b D6 or D12 dual channel power amplifiers configured for the T10 in Point source (PS) mode. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.

---

Applications

Live music
Playback
Speech
Stage monitor
Subwoofer

---

Data

Components	2 x 6.5" / 1 x 1.4" exit compression driver on rotatable waveguide
Max. sound pressure (1m, free field) with D6 / D12	127 /130 dB SPL in Point source configuration
Power handling capacity (RMS / peak 10 ms)	200 / 800 W
Frequency response (-5 dB)	68 / 120 Hz - 18 kHz
Nominal dispersion angle	90° x 35° (point source, h x v)
Cabinets per channel D6 / D12	4
Dimensions mm (H x W x D)	197 x 470 x 300
Weight kg	10.5
Dimensions inch (H x W x D)	7.7 x 18.5 x 11.8
Weight lb	23

---

Application information is presented for guidance only. We reserve the right to make any necessary changes to the products and the published specification. As part of our ongoing product development program we try, where possible, to maintain the highest degree of product compatibility.

---

	recommended use
	with subwoofer
	with a subwoofer suitable for music and high level program
	SPL max peak test signal: pink noise with crest factor 4
	standard/CUT mode

---

Downloads

---

Polar data

Array calculators

CAD drawings 2D/3D

Architectural specifications

---

Documentation

---

Order form for printed documentation from d&b.

---

Accessories

Available PDF documents for the accessories can be found in the table below the images.

---

Z5371 T Flying bracket	Z5372 T Horizontal bracket	Z5012 Pipe clamp for TV spigot
Z5010 TV spigot with fixing plate	Z5015 TV spigot for Flying adapter 02	Z5029 TV spigot
Z5354 E8/E12 Flying adapter	Z5355 E8/E12 Flying adapter link	Z5024 Loudspeaker stand adapter
Z5034 Stand adapter	Z5009 Loudspeaker stand with winder	Z5013 Loudspeaker stand winder M20

---

---

• Top.
• Feedback.