The B2 subwoofer with its high output bandpass horn design and extremely high SPL is ideal for extended bass requirements. It is configurable to be either an infrabass for the C4 system or a high output, alternative subwoofer for the F1222 or C7 systems. When used with a C4 system, d&b recommend a ratio of four C4-SUBs to one B2. The B2 cabinet is constructed from marine plywood, has an impact resistant paint finish and eight integral steel handles. The front of the subwoofer cabinet is fitted with catches at the sides for securing an optional wooden lid, and mounted on the rear are four heavy duty wheels.
The B2 is driven by the d&b D12 dual channel amplifier configured for the B2. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.
|Components||2 x 18" driver|
|Max. sound pressure (1m, free field) with D12||139 / 136 dB SPL|
|Power handling capacity (RMS / peak 10 ms)||600 / 2400 W|
|Frequency response (-5 dB)||37 - 90 Hz / 32 - 68 Hz|
|Cabinets per D12||2|
|Dimensions mm (H x W x D)||1160 x 580 x 920|
|Dimensions inch (H x W x D)||45.6 x 22.8 x 36.2|
Application information is presented for guidance only. We reserve the right to make any necessary changes to the products and the published specification. As part of our ongoing product development program we try, where possible, to maintain the highest degree of product compatibility.
|SPL max peak test signal: pink noise with crest factor 4|
|dimensions without wheels|
|B2-SUB Manual 3.3||English||08.05.12||113 kB|
|The C-Series brochure||English||19.03.13||2559 kB|
|TI 330 Cardioid Subwoofer Array - CSA||English||06.06.08||265 kB|
Order form for printed documentation from d&b.
Available PDF documents for the accessories can be found in the table below the images.
B2-SUB Wooden lid