---

---

MAX12 monitor

MAX12, d&b's smallest stage monitor, is a 2-way full range loudspeaker, which due to the coaxial design has a compact, low profile enclosure. It achieves a high SPL and feedback stability with remarkable vocal presence, clarity and neutral, balanced sound. The MAX12 cabinet is constructed from marine plywood, which incorporates the handles, has an impact resistant paint finish, M10 threaded inserts and a socket to accept a loudspeaker stand.

---

Amplifiers

MAX12 can be driven passively either by the d&b D6 or D12 dual channnel power amplifiers configured for MAX or set to the LINEAR configuration, or actively by the D12 switched to 2-Way Active mode. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals. MAX12 cabinets may also be driven by any high quality power amplifier provided their output power does not exceed 500 Watts into 8 ohms and an additional subsonic filter (25 Hz and 12 dB/octave) is used.

---

Applications

Live music
Playback
Speech
Stage monitor
Subwoofer

---

Data

Components	12" driver /2" coaxial mounted compression driver
Max. sound pressure (1 m, free field) with D6 in passive mode D12 in passive mode D12 in active mode	130 dB SPL 134 dB SPL 135 dB SPL
Power handling capacity (RMS / peak 10 ms)	250 / 1200 W / 8 Ω
Frequency response (-5 dB)	65 Hz - 18 kHz
Nominal dispersion angle (h x v)	80° conical
Cabinets per channel D6 / D12 (passive mode)	2 / 2
Cabinets per D12 (active mode)	2
Dimensions mm (H x W x D)	324 x 486 x 425
Weight kg	22
Dimensions inch (H x W x D)	12.8 x 19.1 x 16.7
Weight lb	48

---

Application information is presented for guidance only. We reserve the right to make any necessary changes to the products and the published specification. As part of our ongoing product development program we try, where possible, to maintain the highest degree of product compatibility.

---

	recommended use
	with subwoofer
	SPL max peak test signal: pink noise with crest factor 4
	with floor coupling
	in applications with low continuous levels or low ambient temperatures up to three loudspeakers per channel D12 may be connected
	overall dimensions (projected footprint)

---

Downloads

---

Polar data

CAD drawings 2D/3D

Architectural specifications

---

Documentation

---

Order form for printed documentation from d&b.

---

Accessories

Available PDF documents for the accessories can be found in the table below the images.

---

Z5012 Pipe clamp for TV spigot	Z5015 TV spigot for Flying adapter 02	Z5020 Flying adapter 02
Z5025 Flying adapter 03	Z5010 TV spigot with fixing plate	Z5024 Loudspeaker stand adapter
Z5047 MAX12 Horizontal bracket	Z5044 MAX Bracket connector	Z5013 Loudspeaker stand winder M20M

---

---

• Top.
• Feedback.