---

---

Q10 loudspeaker

The Q10 is a 110° x 40° passive 2-way loudspeaker housing two 10" LF drivers and a 1.3" HF compression driver with a rotatable constant directivity horn and a passive crossover network. The two 10" neodymium LF drivers are positioned in a dipolar arrangement providing exceptional vertical dispersion control with the nominal angle being maintained down to 400 Hz. The Q10 can be used as a stand-alone full range system or in combinations with other Q-Series cabinets ground stacked, or mounted on a high stand with the Q Flying bracket. When used in the upright configuration it has a very accurate 110° horizontal constant directivity behaviour that is maintained down to approximately 800 Hz. Its wide constant directivity performance provides remarkable transparency when used in close proximity to listeners. It is also ideally suited to ambient and /or distributed sound reinforcement tasks where orientation within the sound field is critical. The Q10 cabinet is constructed from marine plywood and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill, covered with a replaceable acoustically transparent foam. The cabinet incorporates a pair of handles and mounted on the rear panel are two EP5 or NL4 connectors wired in parallel.

---

Amplifiers

The Q10 can be driven either by the d&b D6 or D12 dual channel power amplifiers configured for the Q10. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.

---

Applications

Live music
Playback
Speech
Stage monitor
Subwoofer

---

Data

Components	2 x 10" driver / 1.3" compression driver
Max. sound pressure (1m, free field) with D6 / D12	133 / 137 dB SPL
Power handling capacity (RMS / peak 10 ms)	400 / 1600 W
Frequency response (-5 dB)	60 / 100 Hz - 17 kHz
Nominal dispersion angle (h x v)	110° x 40° CD
Cabinets per channel D6 / D12	2 / 2
Dimensions mm (H x W x D)	580 x 308 x 410
Weight kg	22
Dimensions inch (H x W x D)	22.8 x 12.1 x 16.1
Weight lb	49

---

Application information is presented for guidance only. We reserve the right to make any necessary changes to the products and the published specification. As part of our ongoing product development program we try, where possible, to maintain the highest degree of product compatibility.

---

	recommended use
CD	loudspeaker with constant directivity horn
	with subwoofer
	SPL max peak test signal: pink noise with crest factor 4
	standard/CUT mode
	≥ 400 Hz in dipolar direction
	horn 90° rotatable
	in applications with low continuous levels or low ambient temperatures up to three loudspeakers per channel D12 may be connected

---

Downloads

---

Polar data

Array calculators

CAD drawings 2D/3D

Architectural specifications

---

Documentation

---

Order form for printed documentation from d&b.

---

Accessories

Available PDF documents for the accessories can be found in the table below the images.

---

Z5156 Q Flying adapter	Z5020 Flying adapter 02	Z5025 Flying adapter 03
Z5150 Q Swivel bracket	Z5024 Loudspeaker stand adapter	Z5010 TV spigot with fixing plate
Z5015 TV spigot for Flying adapter 02	Z5012 Pipe clamp for TV spigot	Z5048 Flying pin
Z5013 Loudspeaker stand winder M20	Z5009 Loudspeaker stand with winder	Z5043 MAX Horizontal bracket
Z5161 Q Flying bracket

---

---

FAQs

Please find the specified FAQs here.

---

• Top.
• Feedback.