---

---

Q7 loudspeaker

The Q7 is a 75° x 40° passive 2-way loudspeaker housing two 10" LF drivers and a 1.3" HF compression driver with a rotatable constant directivity horn and a passive crossover network. The two 10" neodymium LF drivers are positioned in a dipolar arrangement providing exceptional vertical dispersion control with the nominal angle being maintained down to 400 Hz. The Q7 with the horn rotated is used to mount the loudspeaker horizontally where space is limited, or the maximum horizontal pattern control is needed and when added to the bottom of Q1 arrays. The Q7 can be used as a stand-alone full range system, in combinations with other Q-Series cabinets ground stacked, or mounted on a high stand with a swivel bracket. They can also be combined in flown array systems. The Q7 cabinet is constructed from marine plywood and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill, covered with a replaceable acoustically transparent foam. The cabinet incorporates a pair of handles and mounted on the rear panel are two EP5 or NL4 connectors wired in parallel.

---

Amplifiers

The Q7 can be driven either by the d&b D6 or D12 dual channel power amplifiers configured for the Q7. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.

---

Applications

Live music
Playback
Speech
Stage monitor
Subwoofer

---

Data

Components	2 x 10" driver / 1.3" compression driver
Max. sound pressure (1m, free field) with D6 / D12	134 / 138 dB SPL
Power handling capacity (RMS / peak 10 ms)	400 / 1600 W
Frequency response (-5 dB)	60 / 100 Hz - 17 kHz
Nominal dispersion angle (h x v)	75° x 40° CD
Cabinets per channel D6 / D12	2 / 2
Dimensions mm (H x W x D)	580 x 308 x 410
Weight kg	22
Dimensions inch (H x W x D)	22.8 x 12.1 x 16.1
Weight lb	49

---

Application information is presented for guidance only. We reserve the right to make any necessary changes to the products and the published specification. As part of our ongoing product development program we try, where possible, to maintain the highest degree of product compatibility.

---

	recommended use
CD	loudspeaker with constant directivity horn
	with subwoofer
	SPL max peak test signal: pink noise with crest factor 4
	standard/CUT mode
	≥ 400 Hz in dipolar direction
	horn 90° rotatable
	in applications with low continuous levels or low ambient temperatures up to three loudspeakers per channel D12 may be connected

---

Downloads

---

Polar data

Array calculators

CAD drawings 2D/3D

Architectural specifications

---

Documentation

---

Order form for printed documentation from d&b.

---

Accessories

Available PDF documents for the accessories can be found in the table below the images.

---

Z5151 Q Splay link	Z5152 Q Front link	Z5153 Locking pins 8 mm
Z5156 Q Flying adapter	Z5020 Flying adapter 02	Z5025 Flying adapter 03
Z5150 Q Swivel bracket	Z5024 Loudspeaker stand adapter	Z5010 TV spigot with fixing plate
Z5015 TV spigot for Flying adapter 02	Z5012 Pipe clamp for TV spigot	Z5048 Flying pin
Z5013 Loudspeaker stand winder M20	Z5009 Loudspeaker stand with winder	Z5043 MAX Horizontal bracket
Z5044 MAX Bracket connector	Z5147 Rota clamp	Z5161 Q Flying bracket

---

---

FAQs

Please find the specified FAQs here.

---

• Top.
• Feedback.