Q subwoofer
The Q-SUB is an actively driven low compression bass-reflex loudspeaker fitted with a high excursion 18" driver. d&b SenseDrive technology is available when powered by the D12 amplifier. The Q-SUB is mechanically compatible with the Q1 and Q7; ten sockets in the front grill and side panels for Q-Series rigging components permit use in various combinations, either flown or ground stacked. The Q-SUB cabinet is constructed from marine plywood with an impact resistant paint finish, a pair of handles, four heavy duty wheels and an M20 threaded flange in the top panel to accept a loudspeaker stand. The front of the loudspeaker cabinet is protected by a rigid metal grill covered with replaceable acoustically transparent foam, and two EP5 or NL4 connectors wired in parallel are mounted on the rear panel. Two runners protect the bottom of the cabinet from scratching, these locate in correspondingly shaped recesses in the top panel to prevent movement when stacked. Fittings for securing an optional transport lid are also provided.
Amplifiers
The Q-SUB can be driven either by the d&b D6 or D12 dual channel power amplifiers configured for the Q-SUB. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.
Applications
| Live music | |
| Playback | |
| Speech | |
| Stage monitor | |
| Subwoofer |  |
Data
| Components | 18" driver |
Max. sound pressure (1m, free field) with D6 / D12 |
129 / 133 dB SPL |
| Power handling capacity (RMS / peak 10 ms) | 400 / 1600 W |
| Frequency response (-5 dB) | 40 Hz - 130 / 100 Hz |
| Cabinets per channel D6 / D12 | 2 / 2 |
| Dimensions mm (H x W x D) | 493 x 580 x 668 |
| Weight kg | 42 |
| Dimensions inch (H x W x D) | 19.4 x 22.8 x 26.3 |
| Weight lb | 92.6 |
Application information is presented for guidance only. We reserve the right to make any necessary changes to the products and the published specification. As part of our ongoing product development program we try, where possible, to maintain the highest degree of product compatibility.
|
recommended use |
|
SPL max peak test signal: pink noise with crest factor 4 |
|
100 Hz mode |
|
in applications with low continuous levels or low ambient temperatures up to three loudspeakers per channel D12 may be connected |
|
dimensions without wheels |
Downloads
Documentation
| Title | Language | Date | Size |
|---|---|---|---|
| Declaration of Conformity Loudspeaker/Amplifiers (CE) | Int | 13.03.12 | 34 kB |
| Q-SUB Manual 2.2 | English | 28.09.09 | 397 kB |
| The Q-Series brochure | English | 15.02.12 | 9242 kB |
| TI 330 Cardioid Subwoofer Array - CSA | English | 06.06.08 | 265 kB |
| TI 350 Q-Series system design and Q-Calc | English | 02.06.06 | 578 kB |
| TI 385 d&b Line array design, ArrayCalc V6.7 | English | 03.04.12 | 3667 kB |
Order form for printed documentation from d&b.
Accessories
Available PDF documents for the accessories can be found in the table below the images.
 |
 |
 |
| Z5151 Q Splay link |
Z5152 Q Front link |
Z5153 Locking pins 8 mm |
 |
 |
 |
| Z5155 Q Hoist connector chain |
Z5159 Q Flying frame |
Z5160 Q Load adapter |
 |
 |
|
| E7921 Transport lid |
Z5013 Loudspeaker stand winder M20 |
| Title | Language | Date | Size |
|---|---|---|---|
| Q-Series Rigging manual 1.2 | English | 05.05.08 | 4563 kB |
| Z5160 Load adapter, Mounting instructions 1.1 | English | 05.08.11 | 381 kB |
FAQs
Please find the specified FAQs here.
