---

R10 Service software

The R10 Service software enables the update of multiple amplifiers from a central location via the d&b Remote network and a direct update using the service port. R10 will search either automatically or on demand for the latest available amplifier firmwares and R10 software updates via the Internet. R10 Service software is focused specifically on service and administration issues of a d&b system.

---

---

Applications

The R10 Service software has a variety of applications. It enables the simultaneous update of multiple amplifiers with the latest firmware from a central location. The software detects which type of d&b amplifier is connected and the user can select the matching firmware required for the update. Settings can be read from an amplifier, saved to file and loaded to an amplifier using this service software. Defined settings may be created and loaded into amplifiers, for example to ensure that configuration switches are set to a known status or the user definable equalization is set flat. In a rental situation standard amplifier settings may be created and applied to all amplifiers when they are returned to stock. In an installation, settings can be copied to additional amplifiers. Using R10, AmpPresets can be adjusted to the application requirements.

 

A Wink function that flashes the amplifier display backlight is included to provide an effective method of locating specific amplifiers. For service purposes, information may be read from an amplifier concerning its condition during an application and errors reported. When additional support is required, the error report can be saved and sent to d&b's service departments for further assessment and diagnosis.

---

• PC with Intel / AMD (1 GHz or more)
• Windows 7 / XP SP3
• 2 GB RAM
• 60 MB free hard disc capacity

or

• Apple Mac / with Intel or PowerPC
• 2 GB RAM
• 160 MB free hard disk capacity

• Mouse
• Screen resolution 1024 x 768 or higher recommended
• CAN interface (see section 'CAN interface' in the R10 manual)

---

	Windows XP, Vista and Windows 7 are either registered trademarks or trademarks of Microsoft Corporation in the United States and / or other countries.
	Mac and Mac OS X are trademarks of Apple Inc., registered in the U.S. and other countries.

---

Downloads

The table below contains the latest version of the R10 Service software.

For Windows download and extract the ZIP file and start setup.exe.

To install R10 on Macintosh systems, double-click on the R10.dmg file and drag R10 to your Applications folder.

As the firmware is not included in R10, it is recommended to perform a "Web SEARCH" on the Firmware tab and download the latest firmware versions after installing R10.

---

---

Documentation

---

• Top.
• Feedback.