---

---

Ti10L loudspeaker

The Ti10L loudspeaker is the installation version of the T10 for deployment as a line array loudspeaker. Road and installation versions differ only in the mounting hardware. The Ti10L cabinet is a passive 2-way design that houses 2 x 6.5” drivers and a 1.4” exit HF compression driver. The very compact loudspeaker design is a unique combination of a rotatable waveguide with horn and an acoustic lens. It provides a vertical line source with a 90° horizontal dispersion that is maintained down to approximately 600 Hz, whilst the integrated lens in the front grill widens the HF dispersion in line array mode to 105°. The two 6.5” neodymium LF drivers are positioned in a dipolar arrangement providing an exceptional dispersion control even at lower frequencies. The Ti10L cabinet is constructed from polyurethane integral hard foam with an impact resistant finish and has integrated line array rigging hardware which, once deployed is fundamentally invisible when viewed from the front. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Mounted on the rear panel are two NL4 connectors wired in parallel. Special colour (SC) or weather resistant (WR) versions are available.

---

Amplifiers

The Ti10L can be driven either by the d&b D6 or D12 dual channel power amplifiers configured for the T10 in Line or Arc mode. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.

---

Applications

Live music
Playback
Speech
Stage monitor
Subwoofer

---

Data

Components	2 x 6.5" / 1 x 1.4" exit compression driver on rotatable waveguide
Max. sound pressure (1m, free field) with D6 / D12	129 /132 dB SPL in Line/Arc configuration
Power handling capacity (RMS / peak 10 ms)	200 / 800 W
Frequency response (-5 dB)	68 / 120 Hz - 18 kHz
Nominal dispersion angle	105° (line array, horizontal)
Splay angle settings	0 - 15° (1° increment)
Cabinets per channel D6 / D12	4
Dimensions mm (H x W x D)	197 x 470 x 300
Weight kg	11
Dimensions inch (H x W x D)	7.7 x 18.5 x 11.8
Weight lb	24

---

Application information is presented for guidance only. We reserve the right to make any necessary changes to the products and the published specification. As part of our ongoing product development program we try, where possible, to maintain the highest degree of product compatibility.

---

	recommended use
	with subwoofer
	with a subwoofer suitable for music and high level program
	SPL max peak test signal: pink noise with crest factor 4
	standard/CUT mode

---

Downloads

---

Polar data

Array calculators

CAD drawings 2D/3D

Architectural specifications

---

Documentation

---

Order form for printed documentation from d&b.

---

Accessories

Available PDF documents for the accessories can be found in the table below the images.

---

Z5147 Rota clamp	Z5370 T Flying frame	Z5155 Q Hoist connector chain
Z5373 T Cluster bracket	Z5010 TV spigot with fixing plate	Z5015 TV spigot 02
Z5029 TV spigot	Z5024 Loudspeaker stand adapter	Z5034 Stand adapter
Z5013 Loudspeaker stand winder M20	Z5374 Ti Flying adapter

---

---

• Top.
• Feedback.