Q10 loudspeaker

The Q10 is a 110° x 40° passive 2-way loudspeaker housing two 10" LF drivers and a 1.3" HF compression driver with a rotatable constant directivity horn and a passive crossover network. The two 10" neodymium LF drivers are positioned in a dipolar arrangement providing exceptional vertical dispersion control with the nominal angle being maintained down to 400 Hz. The Q10 can be used as a stand-alone full range system or in combination with other Q-Series cabinets ground stacked or mounted on a high stand with the Q Flying bracket. When used in the upright configuration it has a very accurate 110° horizontal constant directivity behaviour that is maintained down to approximately 800 Hz. Its wide constant directivity performance provides remarkable transparency when used in close proximity to listeners. It is also ideally suited to ambient and / or distributed sound reinforcement tasks where orientation within the sound field is critical. The Q10 cabinet is constructed from marine plywood and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill, covered with a replaceable acoustically transparent foam. The cabinet incorporates a pair of handles and mounted on the rear panel are two EP5 or NL4 connectors wired in parallel.

Accessories

Accessories

Amplifiers

Amplifiers


The d&b audiotechnik loudspeaker range is designed exclusively for operation with d&b amplifiers. These provide power as well as comprehensive control and protection functions tailored to achieve the performance, reliability and longevity associated with the d&b System approach. The d&b D20 and 30D amplifiers are recommended to drive the Q10. The d&b D80, 10D, D6 and D12 amplifiers can also be used with the appropriate loudspeaker configuration selected.

Data

Data

Components 2 x 10" driver/1.3" compression driver
Max. sound pressure (1m, free field)1
with D6
with D12/D20
with D80

133 dB SPL
137 dB SPL
137 dB SPL
Power handling capacity (RMS/peak 10 ms) 400/1600 W
Frequency response (-5 dB) 60/1002 Hz - 17 kHz
Nominal dispersion angle (h x v) 110° x 40°34 CD
Cabinets per channel D6/D12/D20/D80 2
Dimensions mm (H x W x D) 580 x 308 x 410
Weight kg 22
Dimensions inch (H x W x D) 22.8 x 12.1 x 16.1
Weight lb 49

Documentation

Documentation

Title Language Date Size
Q-Series Rigging manual 1.2 English 05.05.2008 4 MB
Q10 Manual 1.5 English 20.10.2017 196 KB
The Q-Series brochure English 08.04.2014 6 MB

Downloads