The compact, 2-way passive Y10P loudspeaker features two 8” drivers in a dipole arrangement with a 1.4” compression driver mounted onto a rotatable CD horn. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These point source, high performance cabinets offer 110° horizontal directivity controlled down to 500 Hz, matched with a vertical dispersion of 40°. The horn can be rotated by 90° to enable horizontal orientation. The Y10P provides a broad variety of deployment possibilities, especially when used as a stand-alone full range system, or combined with other elements from the Y-Series, either ground stacked or flown. The loudspeaker cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The cabinet incorporates a pair of handles whilst M10 threaded inserts are provided for attaching d&b rigging hardware. Additionally, two further M10 sockets accept the 8mm load pin to expand the mounting options.
The d&b audiotechnik loudspeaker range is designed exclusively for operation with d&b amplifiers. These provide power as well as comprehensive control and protection functions tailored to achieve the performance, reliability and longevity associated with the d&b System approach. The d&b D80 amplifier is recommended to drive the Y10P. The d&b D20, 10D, 30D and D6 amplifiers can also be used with the appropriate loudspeaker configuration selected.
|Configuration||High performance 2-way passive point source loudspeaker|
|Nominal impedance||8 Ω|
|Power handling capacity (RMS/peak 10 ms)||400/1600 W|
|Nominal dispersion angle (h x v)||110° x 40°|
2 x 8" driver with neodymium magnet
1.4" exit compression driver
passive crossover network
2 x NLT4 F/M
optional 2 x NL4 or 2 x EP5
|Dimensions (H x W x D)||
580 x 257 x 341 mm
22.8 x 10 x 13.4"
Application information is presented for guidance only. d&b reserves the right to make any necessary changes to the products and the published specifications. As part of the ongoing development program d&b tries to maintain the highest degree of product compatibility.
The 2-way dipolar, passive loudspeaker shall consist of two 8" low frequency drivers with a neodymium magnet assembly and one 1.4" exit neodymium compression driver mounted to a rotatable CD horn and a passive crossover network.
The loudspeaker shall only be operated by a dedicated, compatible controller amplifier.
The cabinet enclosure shall be made from marine plywood with an impact and weather protected PCP (Polyurea Cabinet Protection) finish.
The drivers shall be protected by a rigid metal grill backed by an acoustically transparent foam. The cabinet shall incorporate one handle on the top and bottom panel.
The cabinet shall incorporate two M10 threaded inserts on the top and bottom panel for the secure attachment of dedicated mounting brackets.
Two additional combined sockets, one in the top panel and one at the center rear of the cabinet shall be incorporated to support a singel cabinet or to secure the aiming of an array in conjunction with a dedicated flying pin or to apply a secondary safety device in conjunction with a saftey eye bolt M10.
The connection panel on the back shall be recessed and fitted with speakon NLT4 F/M sockets (NL4 M or EP5 connectors as an option).
The HF horn shall have a nominal dispersion of 110° x 40° (h x v).
The power handling capacity shall be 400 W RMS and 1600 W peak (10 ms). The frequency response (–5 dB) measured on axis shall be 59 Hz to 18 kHz with a maximum sound pressure of at least 136 dB.
The dimensions (WxHxD) shall not exceed 257 x 580 x 341 mm (10" x 22.8" x 13.4") and shall weigh no more than 18 kg (40 lb).
The loudspeaker shall be the Y10P by d&b audiotechnik GmbH.