The biaxial 10S/10S-D are high performance 2-way loudspeakers housing a single 10" driver in a bass-reflex enclosure and different HF sections. They are lightweight passive designs using neodymium drivers and large horns for accurate pattern control with rotatable dispersion characteristics of 75° x 50° and 110° x 55° respectively. With their frequency response from 60 Hz to 18 kHz both versions can be used as full range systems and can also be supplemented by different subwoofers from the xS-Series. The enclosures are constructed from marine plywood with an impact resistant black paint finish and are Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The top and bottom panels incorporate a pair of M10 threaded inserts, and the rear panel incorporates two M8 threaded inserts, two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP34 rating, and enables operation of loudspeakers in changing ambient conditions.
The d&b audiotechnik loudspeaker range is designed exclusively for operation with d&b amplifiers. These provide power as well as comprehensive control and protection functions tailored to achieve the performance, reliability and longevity associated with the d&b System approach. The d&b 30D amplifier is recommended to drive the 10S. The d&b 10D, D20, D80 and D6 amplifiers can also be used with the appropriate loudspeaker configuration selected.
|Frequency response (–5 dB standard)||60 Hz - 18 kHz|
|Frequency response (–5 dB CUT mode)||100 Hz - 18 kHz|
Max. sound pressure (1m, free field)1
|Cabinets per amplifier channel||3|
|Configuration||Installation specific high performance 2-way loudspeaker|
|Nominal impedance||12 Ω|
|Power handling capacity (RMS/peak 10 ms)||200/1200 W|
|Nominal dispersion angle (h x v)||75° x 50° rotatable|
10" driver with neodymium magnet
1.4" compression driver with CD horn
Passive crossover network
2 x NL4
screw terminal block
|Dimensions (H x W x D)||
580 x 283 x 350 mm
22.8 x 11.1 x 13.8"
Application information is presented for guidance only. d&b reserves the right to make any necessary changes to the products and the published specifications. As part of the ongoing development program d&b tries to maintain the highest degree of product compatibility.
The 2-way biaxial, passive loudspeaker shall consist of a 10" low frequency driver with a neodymium magnet assembly and a 1.4" neodymium compression driver mounted on a rotatable CD-Horn.
The bass-reflex enclosure shall be made from marine plywood with an impact resistant black paint finish.
Special colours according to RAL table and a weather resistant option shall be available upon request.
The drivers shall be protected by a powder coated metal grill with an acoustically transparent foam.
The cabinet shall be Ball Impact Resistant for schools and sports halls.
The cabinet shall incorporate two M8 threaded inserts on the rear panel for the secure attachment of wall mounts.
The cabinet shall incorporate one M10 threaded inserts on the top and bottom panel for the secure attachment of mounting brackets.
The connection panel on the back shall be recessed and fitted with two NL4 sockets and a two pole screw terminal block.
A cover plate for protection of the connection panel shall be included.
The loudspeaker shall only be operated by a dedicated, compatible controller amplifier.
The loudspeaker shall have a nominal dispersion angle of 75° x 50° (H x V).
The power handling capacity shall be 200 W RMS and 1200 W peak (10 ms).
The frequency response (-5 dB) measured on axis shall be 60 Hz to 18 kHz with a maximum sound pressure of at least 127 dB or 130 dB respectively when operated with one of its dedicated controller amplifiers.
The dimensions shall not exceed 283 x 580 x 350 mm (WxHxD) and shall weigh no more than 13 kg (29 lb).
The loudspeaker shall be the 10S by d&b audiotechnik GmbH.