The 12S-SUB is a compact high performance subwoofer for use with the xS-Series loudspeakers. The cabinet houses a long excursion 12” neodymium driver in a bass-reflex design and it can be used stand-alone, stacked or individually flown. The enclosure is constructed from marine plywood with an impact resistant black or white paint finish and is Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Incorporated into the side panels are a pair of M10 threaded inserts and into the rear panel are two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP34 rating, and enables operation of loudspeakers in changing ambient conditions.
The d&b audiotechnik loudspeaker range is designed exclusively for operation with d&b amplifiers. These provide power as well as comprehensive control and protection functions tailored to achieve the performance, reliability and longevity associated with the d&b System approach. The d&b 30D amplifier is recommended to drive the 12S-SUB. The d&b 10D, D20, D80 and D6 amplifiers can also be used with the appropriate loudspeaker configuration selected.
|Frequency response (–5 dB standard)||45 - 130 Hz|
|Frequency response (-5 dB 100 Hz mode)||45 - 100 Hz|
Max. sound pressure (1m, free field)1
|Cabinets per amplifier channel||2|
|Configuration||Installation specific compact subwoofer|
|Nominal impedance||8 Ω|
|Power handling capacity (RMS/peak 10 ms)||300/1600 W|
|Components||12" driver with neodymium magnet|
2 x NL4
screw terminal block
|Dimensions (H x W x D)||
354 x 530 x 448 mm
13.9 x 20.9 x 17.6"
Application information is presented for guidance only. d&b reserves the right to make any necessary changes to the products and the published specifications. As part of the ongoing development program d&b tries to maintain the highest degree of product compatibility.
The loudspeaker shall consist of a 12" long excursion low frequency neodymium driver in bass-reflex design.
The enclosure shall be made from marine plywood with an impact resistant black paint finish.
Special colours according to RAL table and a weather resistant option shall be available upon request.
The drivers shall be protected by a powder coated metal grill with an acoustically transparent foam.
The cabinet shall be Ball Impact Resistant for schools and sports halls.
The cabinet shall incorporate two M10 threaded inserts on each side panel for the secure attachment of brackets.
The connection panel on the back shall be recessed and fitted with two NL4 sockets and a two pole screw terminal block.
A cover plate for protection of the connection panel shall be included.
The loudspeaker shall only be operated by a dedicated, compatible controller amplifier.
The power handling capacity shall be 300 W RMS and 1600 W peak (10 ms).
The frequency response (-5 dB) measured on axis shall be 45 Hz to 130 Hz with a maximum sound pressure of at least 124 dB or 127 dB respectively when operated with one of its dedicated controller amplifiers.
The dimensions shall not exceed 530 x 354 x 448 mm (WxHxD) and shall weigh no more than 16 kg (35 lb).
The loudspeaker shall be the 12S-SUB by d&b audiotechnik GmbH.