V7P loudspeaker

The 3-way passive V7P loudspeaker features two 10“ drivers in a dipole arrangement with a horn loaded 8“ MF driver and a 1.4“ compression driver mounted onto a rotatable CD horn. The innovative horn design for the centrally mounted 8“ MF driver produces a remarkable sensitivity resulting in an exceptional performance in the vocal range. An advanced bass-reflex and venting design delivers an extended LF output with full bandwidth capabilities. All components are arranged symmetrically around the centre axis of the cabinet to produce a perfect symmetrical dispersion pattern. Due to the dipolar arrangement of the LF drivers, broadband dispersion control is maintained down to approximately 350 Hz in the same plane as the dipole.

This point source, high performance loudspeaker offers 75° horizontal directivity matched with a vertical dispersion of 40°; the horn can be rotated by 90° to enable horizontal orientation. The V7P provides a broad variety of deployment possibilities, especially when used as a stand-alone full range system, or combined with other elements from the V-Series, either ground stacked or flown.

The loudspeaker cabinet is constructed from marine plywood, and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill. The V7P cabinet incorporates a pair of handles. M10 threaded inserts are provided for attaching d&b rigging hardware. Additionally, three further M10 sockets accept the 8mm load pin to expand the mounting options.

  • V-Series
  • Finance-Series
  • Comparison list (0)
  • Add to comparison list

Accessories

Accessories

Amplifiers

Amplifiers


The d&b audiotechnik loudspeaker range is designed exclusively for operation with d&b amplifiers. These provide power as well as comprehensive control and protection functions tailored to achieve the performance, reliability and longevity associated with the d&b System approach. The d&b D80 amplifier is recommended to drive the V7P. The d&b D20 and 30D amplifiers can also be used with the appropriate loudspeaker configuration selected.

Data

Data

System data  
Frequency response (–5 dB standard) 59 Hz - 18 kHz
Frequency response (–5 dB CUT mode) 100 Hz - 18 kHz
Max. sound pressure (1m, free field)1
with D20/30D
with D80
137 dB
140 dB
Cabinets per amplifier channel 2
Loudspeaker data  
Configuration High performance 3-way passive point source loudspeaker
Nominal impedance 8 Ω
Power handling capacity (RMS/peak 10 ms) 500/2000 W
Nominal dispersion angle (h x v) 75° x 40°
Components 2 x 10" LF driver with neodymium magnet
1 x 8" MF driver with neodymium magnet
1 x 1.4” exit compression driver
Passive crossover network
Connections 2 x NLT4 F/M
optional 2 x NL4 M or 2 x EP5
Dimensions, weight  
Dimensions (H x W x D) 700 x 308 x 466 mm
27.5 x 12 x 18.3"
Weight 33 kg
75 lb

Application information is presented for guidance only. d&b reserves the right to make any necessary changes to the products and the published specifications. As part of the ongoing development program d&b tries to maintain the highest degree of product compatibility.

Documentation

Documentation

Title Language Date Size
EU Declaration of Conformity (CE) International 04.10.2016 51 KB
The V-Series brochure English 19.05.2017 10 MB
V7P Datasheet 1.2 English 02.03.2016 299 KB
V7P/V10P Manual 1.3 English 29.03.2017 1 MB

Downloads

Architectural specifications

Architectural specifications

The 3-way dipolar, passive loudspeaker shall consist of two 10" low frequency drivers, an integrated mid-range unit comprising one 8" midrange driver, all with a neodymium magnet assemblies and one, coaxially mounted 1.4" exit neodymium compression driver coupled to a rotatable CD horn and a passive crossover network.
The loudspeaker shall only be operated by a dedicated, compatible controller amplifier.

The cabinet enclosure shall be made from marine plywood with an impact and weather protected PCP (Polyurea Cabinet Protection) finish.
The drivers shall be protected by a rigid metal grill backed by an acoustically transparent foam. The cabinet shall incorporate one handle on the top and bottom panel.
The cabinet shall incorporate two M10 threaded inserts on the top and bottom panel for the secure attachment of dedicated mounting brackets.
Three additional combined sockets, one in the top panel and two at the rear of the cabinet shall be incorporated to support a single cabinet or to secure the aiming of an array in conjunction with a dedicated flying pin or to apply a secondary safety device in conjunction with a safety eye bolt M10.

The connection panel on the back shall be recessed and fitted with speakon NLT4 F/M sockets (NL4 M or EP5 connectors as an option).

The HF horn shall have a nominal dispersion of 75° x 40° (h x v).

The power handling capacity shall be 500 W RMS and 2000 W peak (10 ms). The frequency response (–5 dB) measured on axis shall be 59 Hz to 18 kHz with a maximum sound pressure of at least 140 dB.

The dimensions (WxHxD) shall not exceed 308 x 700 x 466 mm (12" x 27.5" x 18.3") and shall weigh no more than 33 kg (75 lb).

The loudspeaker shall be the V7P by d&b audiotechnik GmbH.