 |
|
Amplifiers.
Applications.
Data.
Downloads.
Documentation.
Accessories.
E12X-SUB
The E12X-SUB is a compact, light weight, high performance subwoofer for use with d&b
E-Series loudspeakers. The built in passive crossover network allows the E12X-SUB to
be operated in parallel to the E8 loudspeaker on the same amplifier channel, greatly
extending the low frequency headroom and bandwidth of the systems. Alternatively it
can be operated actively driven by its own amplifier channel without the need for any
changes to the subwoofer. In active mode the E12X-SUB can be used to supplement any
of the E-Series cabinets. The E12X-SUB cabinet is constructed from marine plywood and
has an impact resistant finish, a handle and an M20 threaded flange on the top to accept
the d&b Loudspeaker stand winder M20. The loudspeaker cabinet is also available in
Special Colour (SC) and Weather Resistant (WR) options.
Amplifiers
The E12X-SUB can be driven either by d&b's D6 or D12 dual channel power amplifiers configured
for the
E12X-SUB. It may also be driven passively with the E8 loudspeaker from the same channel of
a D6 or D12 dual channel power amplifier using the E8-X configuration. More detailed information on
specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker
or amplifier manuals.
Applications
|
|
| Live-music |
|
|
| Playback |
|
|
| Speech |
|
|
| Stage monitor |
|
|
| Subwoofer |
 |
|
Data
|
|
| Components |
12" driver |
|
Max. sound pressure (1 m, free field) with D6 / D12 |
124 / 127 dB SPL |
|
| Power handling capacity (RMS / peak 10 ms) |
300 / 1600 W |
|
| Frequency response (-5 dB) |
45 Hz - 100 / 140 Hz |
|
| Cabinets per channel D6 / D12 |
2 / 2 |
|
| |
|
| Dimensions mm (h x w x d) |
358 x 530 x 448 |
|
| Weight kg |
18 |
|
| Dimensions inch (h x w x d) |
14.1 x 20.9 x 17.6 |
|
| Weight lb |
40 |
|
 |
Application information is presented for guidance only. We reserve the right to make
any necessary changes to the products and the published specification. As part of our
ongoing product development program we try, where possible, to maintain the highest
degree of product compatibility.
| |
recommended use |
| |
SPL max peak, test signal: pink noise with crest factor 4 |
| |
140 Hz mode |
| |
in applications with low continuous levels or low ambient temperatures
up to three loudspeakers per channel D12 may be connected |
|
Top of the page.
Downloads
CAD drawings 2D/3D
Documentation
Order form
for printed documentation from d&b.
Accessories
Available PDF documents for the accessories can be found in
the table below the images.
|
|
|
|
|
|
Z5013
Loudspeaker stand winder M20 |
|
 |
|
|
|
|
 |
|
|
Declaration of Conformity Loudspeaker/Amplifiers (CE)