 |
|
Amplifiers.
Applications.
Data.
Downloads.
Documentation.
Accessories.
E15X subwoofer
The E15X-SUB is a compact, light weight, high performance subwoofer for use with d&b
E-Series loudspeakers. The built in passive crossover network allows the E15X-SUB to be
operated in parallel to E12 or E12-D loudspeakers on the same amplifier channel, greatly
extending the low frequency headroom and bandwidth of the systems. Alternatively it can
be operated actively driven by its own amplifier channel without the need for any changes to
the subwoofer. In active mode the E15X-SUB can be used to supplement any of the E-Series cabinets.
The E15X-SUB cabinet is constructed from marine plywood and has an impact resistant finish, a
pair of handles and an M20 threaded flange on the top to accept the d&b loudspeaker stand winder.
Amplifiers
The E15X-SUB can be driven either by d&b's D6 or D12 dual channel power amplifiers configured for the
E15X-SUB. It may also be driven passively with E12 or E12D loudspeakers from the same channel of a D6 or
D12 dual channel power amplifier using the E12-X or E12-DX configurations.
More detailed information on specific loudspeaker setups with d&b amplifiers
is available either in the relevant loudspeaker or amplifier manuals.
Applications
|
|
| Live-music |
|
|
| Playback |
|
|
| Speech |
|
|
| Stage monitor |
|
|
| Subwoofer |
 |
|
Data
|
|
| Components |
15" driver |
|
Max. sound pressure  with D6 / D12 |
127 / 130 dB SPL |
|
| Power handling capacity (RMS / peak 10 ms) |
300 / 1600 W |
|
| Frequency response (-5 dB) |
37 Hz - 140 / 100  Hz |
|
| Cabinets per channel D6 / D12 |
2 / 2  |
|
| |
|
| Dimensions mm (h x w x d) |
426 x 530 x 550 |
|
| Weight kg |
24 |
|
| Dimensions inch (h x w x d) |
16.8 x 20.9 x 21.7 |
|
| Weight lb |
52.9 |
|
 |
Application information is presented for guidance only. We reserve the right to make
any necessary changes to the products and the published specification. As part of our
ongoing product development program we try, where possible, to maintain the highest
degree of product compatibility.
| |
recommended use |
| |
SPL max peak, test signal: pink noise with crest factor 4 |
| |
100 Hz mode |
| |
in applications with low continuous levels or low ambient temperatures
up to three loudspeakers per channel D12 may be connected |
|
Top of the page.
Downloads
2D CAD drawings (DWG)
3D CAD models (DWG, AutoCAD 2000)
3D CAD models (DWG, AutoCAD 2004)
Documentation
Order form
for printed documentation from d&b.
Accessories
Available PDF documents for the accessories can be found in
the table below the images.
|
|
|
|
|
|
Z5013
Loudspeaker stand M20 with winder |
|
 |
|
|
|
|
 |
|
|
E15X-SUB Manual 1.1