 |
|
Applications.
System requirements.
Downloads.
Documentation.
R10 Service software
The R10 Service software for personal computer platforms enables the update of multiple amplifiers
from a central location via the d&b Remote network. R10 Service software is focused specifically
on service and administration issues of a d&b system.
Applications
The R10 Service software has a variety of applications. It enables the simultaneous
amplifier firmware update with the latest amplifier firmware of up to 63 amplifiers
from a central location. The software detects which type of d&b amplifier is connected and the
user can select the matching firmware required for the update. Settings can be read from an amplifier,
saved to file and loaded to an amplifier using this service software. Defined settings may be created
and loaded into amplifiers, for example to ensure that configuration switches are set to a known status
or the user definable equalization is set flat. In a rental situation standard amplifier settings may
be created and applied to all amplifiers when they are returned to stock. In an installation, settings
can be copied to additional amplifiers. Using R10, AmpPresets can be adjusted to the application requirements.
A Wink function that flashes the amplifier display backlight and a Honk function that produces an
audible tone are included to provide an effective method of locating specific amplifiers or loudspeakers
within a system. For service purposes, information may be read from an amplifier concerning its
condition during an application and errors reported. When additional support is required, the error
report can be saved and sent to d&b's service departments for further assessment and diagnosis.
System requirements
 PC with Intel/AMD (800 MHz or more) |
| 256 MB RAM, 512 MB RAM recommended |
| 10 MB free hard disc capacity |
Windows Vista/XP SP2/2000 SP4 |
| Mouse |
| 1024 x 768 or higher recommended |
| CAN interface (see section 'CAN interface'
in the R10 manual) |
| |
Windows 2000, Windows XP and Windows Vista are either registered trademarks or
trademarks of Microsoft Corporation in the United States and / or other countries. |
Downloads
The table below contains links to the latest version of the R10 Service software, Firmware Installer, Firmware
update installation guide and R10 as well as firmware release notes. Download both ZIP files from the table
below and follow the instructions given in the 'Firmware update installation guide' from the Documentation
table below.
Documentation
|
 |
|
|
 |
|
|
Firmware Installer V1.1 (zip)