 |
|
Amplifiers.
Applications.
Data.
Downloads.
Documentation.
Accessories.
Ti10L loudspeaker
The Ti10L loudspeaker is the installation version of the T10 for deployment as a line array loudspeaker.
Road and installation versions differ only in the mounting hardware. The Ti10L cabinet is a passive 2-way
design that houses 2 x 6.5” drivers and a 1.4” exit HF compression driver. The very compact loudspeaker design
is a unique combination of a rotatable waveguide with horn and an acoustic lens. It provides a vertical
line source with a 90° horizontal dispersion that is maintained down to approximately 600 Hz, whilst the
integrated lens in the front grill widens the HF dispersion in line array mode to 105°. The two 6.5” neodymium
LF drivers are positioned in a dipolar arrangement providing an exceptional dispersion control even at lower
frequencies. The Ti10L cabinet is constructed from polyurethane integral hard foam with an impact resistant
finish and has integrated line array rigging hardware which, once deployed is fundamentally invisible when
viewed from the front. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an
acoustically transparent foam. Mounted on the rear panel are two NL4 connectors wired in parallel.
Special colour (SC) or weather resistant (WR) versions are available.
Amplifiers
The Ti10L can be driven either by d&b's D6 or D12 dual channel power amplifiers configured for the T10
in Line or Arc mode. More detailed information on specific loudspeaker setups with d&b amplifiers
is available either in the relevant loudspeaker or amplifier manuals.
Applications
|
|
| Live-music |
  |
|
| Playback |
 |
|
| Speech |
|
|
| Stage monitor |
|
|
| Subwoofer |
|
|
Data
|
|
| Components |
2 x 6.5" / 1 x 1.4" exit compression driver on rotatable waveguide |
|
Max. sound pressure (1 m, free field)  with D6 / D12 |
129 / 132 dB SPL in Line/Arc configuration |
|
| Power handling capacity (RMS / peak 10 ms) |
200 / 800 W |
|
| Frequency response (-5 dB) |
68 / 120  Hz - 18 kHz |
|
| Nominal dispersion angle |
105° (line array, horizontal) |
|
| Splay angle settings |
0 - 15° ( 1° increment) |
|
| Cabinets per channel D6 / D12 |
4 |
|
| |
|
| Dimensions mm (h x w x d) |
197 x 470 x 300 |
|
| Weight kg |
11 |
|
| Dimensions inch (h x w x d) |
7.72 x 18.50 x 11.81 |
|
| Weight lb |
24 |
|
 |
Application information is presented for guidance only. We reserve the right to make
any necessary changes to the products and the published specification. As part of our
ongoing product development program we try, where possible, to maintain the highest
degree of product compatibility.
| |
recommended use |
| |
with subwoofer |
| |
with a subwoofer suitable for music and high level program |
| |
SPL max peak, test signal: pink noise with crest factor 4 |
| |
standard/CUT mode |
|
Top of the page.
Downloads
Array calculators
CAD drawings 2D/3D
Documentation
Order form
for printed documentation from d&b.
Accessories
Available PDF documents for the accessories can be found in
the table below the images.
|
|
|
|
|
|
Z5147
Rota clamp |
|
Z5370
T Flying frame |
|
Z5155
Q Hoist connector chain |
|
 |
Z5373
T Cluster bracket |
|
Z5010
TV spigot with fixing plate |
|
Z5015
TV spigot for Flying adapter 02 |
|
|
Z5029
TV spigot |
|
Z5024
Loudspeaker stand adapter |
|
Z5034
Stand adapter |
|
|
Z5013
Loudspeaker stand winder M20, Z5373 T Cluster bracket |
|
|
|
|
|
|
 |
|
|
Declaration of Conformity Loudspeaker/Amplifiers (CE)