 |
|
Amplifiers.
Applications.
Data.
Downloads.
Documentation.
Accessories.
Ti10P loudspeaker
The Ti10P loudspeaker is the installation version of the T10 for deployment as a point source loudspeaker.
Road and installation version differ only in the mounting hardware. The Ti10P cabinet is a passive 2-way
design that houses 2 x 6.5" drivers, a 1.4" exit HF compression driver and can be used either in horizontal
or vertical orientation. The very compact loudspeaker design is a unique combination of a rotatable waveguide
with horn and an acoustic lens. The horn can easily be rotated from outside the loudspeaker without tools or
removing the front grill. This is achieved through apertures at the cabinet sides which allow rotation to both
vertical or horizontal setup. It provides a vertical line source with a 90° horizontal dispersion that is
maintained down to approximately 600 Hz, whilst the integrated lens in the front grill widens the HF dispersion
in horizontal setup to 105°. When the loudspeaker is used upright, the lens curves the wave front of the line
source providing a 90° x 35° dispersion pattern. The two 6.5" neodymium LF drivers are positioned in a
dipolar arrangement providing an exceptional dispersion control even at lower frequencies. The Ti10P cabinet
is constructed from polyurethane integral hard foam with an impact resistant finish and has integrated threads
for attaching installation hardware. The front of the loudspeaker cabinet is protected by a rigid metal grill
backed by an acoustically transparent foam. Mounted on the rear panel are two NL4 connectors wired in
parallel. Special colour (SC) or weather resistant (WR) versions are available.
Amplifiers
The Ti10P can be driven either by d&b's D6 or D12 dual channel power amplifiers configured
for the T10 in Point source (PS) mode. More detailed information on specific loudspeaker setups with d&b amplifiers
is available either in the relevant loudspeaker or amplifier manuals.
Applications
|
|
| Live-music |
  |
|
| Playback |
 |
|
| Speech |
|
|
| Stage monitor |
|
|
| Subwoofer |
|
|
Data
|
|
| Components |
2 x 6.5" / 1 x 1.4" exit compression driver on rotatable waveguide |
|
Max. sound pressure (1 m, free field)  with D6 / D12 |
127 / 130 dB SPL in Point source configuration |
|
| Power handling capacity (RMS / peak 10 ms) |
200 / 800 W |
|
| Frequency response (-5 dB) |
68 / 120  Hz - 18 kHz |
|
| Nominal dispersion angle |
90° x 35° (point source, h x v) |
|
| Cabinets per channel D6 / D12 |
4 |
|
| |
|
| Dimensions mm (h x w x d) |
197 x 470 x 300 |
|
| Weight kg |
10.5 |
|
| Dimensions inch (h x w x d) |
7.72 x 18.50 x 11.81 |
|
| Weight lb |
23 |
|
 |
Application information is presented for guidance only. We reserve the right to make
any necessary changes to the products and the published specification. As part of our
ongoing product development program we try, where possible, to maintain the highest
degree of product compatibility.
| |
recommended use |
| |
with subwoofer |
| |
with a subwoofer suitable for music and high level program |
| |
SPL max peak, test signal: pink noise with crest factor 4 |
| |
standard/CUT mode |
|
Top of the page.
Downloads
Polar data
CAD drawings 2D/3D
Documentation
Order form
for printed documentation from d&b.
Accessories
Available PDF documents for the accessories can be found in
the table below the images.
|
|
|
|
|
|
Z5371
T Flying bracket |
|
Z5372
T Horizontal bracket |
|
Z5012
Pipe clamp for TV spigot |
|
 |
Z5010
TV spigot with fixing plate |
|
Z5015
TV spigot for Flying adapter 02 |
|
Z5029
TV spigot |
|
|
Z5354
E8/E12 Flying adapter |
|
Z5355
E8/E12 Flying adapter link |
|
Z5024
Loudspeaker stand adapter |
|
|
Z5034
Stand adapter |
|
Z5009
Loudspeaker stand with winder |
|
Z5013
Loudspeaker stand winder M20 (Ti10P with E15X-SUB) |
|
|
|
|
|
 |
|
|
Declaration of Conformity Loudspeaker/Amplifiers (CE)