10A / 10A-D loudspeakers
The biaxial 10A/10A-D are high performance 2-way point source loudspeakers housing a single 10” driver in a bass-reflex enclosure with different HF sections. They are lightweight passive designs using neodymium drivers and large horns for accurate pattern control, with rotatable dispersion characteristics of 75° x 50° and 110° x 55° respectively. Both loudspeakers are equipped with a 1.4” exit compression driver. With their frequency response from 60 Hz to 18 kHz both versions can be used as full range systems and can also be supplemented by different subwoofers from either the xS or xA-Series. The 18A or 27A subwoofers can also be integrated into the array. The enclosures are constructed from marine plywood with an impact resistant black paint finish and are Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinets are protected by a rigid metal grill backed by an acoustically transparent foam. The side panels have an integrated rigging system and the rear panel incorporates two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP34 rating, and enables operation of loudspeakers in changing ambient conditions.
Amplifiers
The 10A / 10A-D can be driven either by the d&b D6 or D12 dual channel power amplifiers configured for the 10S/A or 10S/A-D respectively. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.
Data
| Configuration | 2-way arrayable loudspeaker |
| Components | 10" driver with neodymium magnet 1.4" compression driver |
Max. sound pressure (1m, free field) with D6 / D12 |
127 / 130 dB SPL |
| Power handling capacity (RMS / peak 10 ms) | 200 / 1200 W |
| Frequency response (-5 dB) | 60 / 100 Hz - 18 kHz |
| Nominal dispersion angle (h x v) 10A / 10A-D | 75° x 50°  / 110° x 55° |
| Cabinets per channel D6 / D12 | 3 |
| Dimensions mm (H x W x D) | 283 x 580 x 350 |
| Weight kg | 14 |
| Dimensions inch (H x W x D) | 11.1 x 22.8 x 13.8 |
| Weight lb | 31 |
Application information is presented for guidance only. We reserve the right to make any necessary changes to the products and the published specification. As part of our ongoing product development program we try, where possible, to maintain the highest degree of product compatibility.
 |
recommended use |
 |
with subwoofer |
 |
from 1 up to 3 as array |
|
SPL max peak, test signal: pink noise with crest factor 4 |
|
standard/CUT mode |
|
horn 90° rotatable |
Downloads
Documentation
| Title | Language | Date | Size |
|---|---|---|---|
| 10A/10A-D Manual 1.1 | English | 23.08.11 | 1044 kB |
| Declaration of Conformity Loudspeaker/Amplifiers (CE) | Int | 13.03.12 | 34 kB |
| The xA-Series brochure | English | 15.02.12 | 2580 kB |
Order form for printed documentation from d&b.
Accessories
Available PDF documents for the accessories can be found in the table below the images.
 |
 |
 |
| Z5415 Flying adapter xA |
Z5414 Flying bar xA |
Z5413 Flying bar connector xA |
 |
 |
 |
| Z5416 Connector plate 10A |
Z5419 Load bar xA with Z5420 2 x Load eye bolt |
Z5147 Rota Clamp |
| Title | Language | Date | Size |
|---|---|---|---|
| xA-Series Rigging manual 1.1 EN | English | 29.03.12 | 1854 kB |
| Z5147 Rota Clamp, Mounting instructions | English | 05.12.06 | 447 kB |
