10AL / 10AL-D loudspeakers
The biaxial 10AL/10AL-D are high performance 2-way line array modules. They employ a single 10” driver in a bass-reflex enclosure and constant directivity HF line sources with either 75° or 105° horizontal coverage respectively using dual 1” exit drivers. They are lightweight passive designs using neodymium drivers and large horns for accurate pattern control. With their frequency response from 60 Hz to 18 kHz both versions can be used as full range systems and can also be supplemented by subwoofers from either the xS or xA-Series. The18A or 27A subwoofers can also be integrated into the array. The enclosures are constructed from marine plywood with an impact resistant black paint finish and are Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinets are protected by a rigid metal grill backed by an acoustically transparent foam. The side panels have an integrated rigging system and the rear panel incorporates two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP34 rating, and enables operation of loudspeakers in changing ambient conditions.
Amplifiers
The 10AL /10AL-D can be driven either by the d&b D6 or D12 dual channel power amplifiers configured for the 10A. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.
Data
| Configuration | 2-way line source loudspeaker |
| Components | 10" driver with neodymium magnet 2 x 1" compression driver |
Max. sound pressure (1m, free field) 10AL with D6 / D12 10AL-D with D6 / D12 |
130 / 133 dB SPL 129 / 132 dB SPL |
| Power handling capacity (RMS / peak 10 ms) | 200 / 1200 W |
| Frequency response (-5 dB) | 60 / 110 Hz - 18 kHz |
| Nominal dispersion angle (horizontal) 10AL / 10AL-D | 75° / 105° |
| Cabinets per channel D6 / D12 | 3 |
| Dimensions mm (H x W x D) | 283 x 580 x 350 |
| Weight kg | 14 |
| Dimensions inch (H x W x D) | 11.1 x 22.8 x 13.8 |
| Weight lb | 31 |
Application information is presented for guidance only. We reserve the right to make any necessary changes to the products and the published specification. As part of our ongoing product development program we try, where possible, to maintain the highest degree of product compatibility.
 |
recommended use |
 |
with subwoofer |
 |
from 3 up to 9 as array |
|
SPL max peak, test signal: pink noise with crest factor 4 |
|
standard/CUT mode |
Downloads
Documentation
| Title | Language | Date | Size |
|---|---|---|---|
| 10AL/10AL-D Manual 1.2 | English | 23.08.11 | 660 kB |
| Declaration of Conformity Loudspeaker/Amplifiers (CE) | Int | 13.03.12 | 34 kB |
| The xA-Series brochure | English | 15.02.12 | 2580 kB |
Order form for printed documentation from d&b.
Accessories
Available PDF documents for the accessories can be found in the table below the images.
 |
 |
 |
| Z5415 Flying adapter xA |
Z5414 Flying bar xA |
Z5413 Flying bar connector xA |
 |
 |
 |
| Z5417 Connector plate 10AL |
Z5421 Connector plate xA, neg. splay |
Z5419 Load bar xA with Z5420 2 x Load eye bolt |
 |
||
| Z5147 Rota Clamp |
| Title | Language | Date | Size |
|---|---|---|---|
| xA-Series Rigging manual 1.1 EN | English | 29.03.12 | 1854 kB |
| Z5147 Rota Clamp, Mounting instructions | English | 05.12.06 | 447 kB |
