Questions les plus fréquentes
Est il possible d'utiliser La Q7 en tant que Downfill dans une ligne source composée de Q1? le filtre en peigne généré par le recouvrement des zones de dispersion des deux haut-parleurs rend il cette solution inacceptable?
Une série de mesures et de test d'écoute nous ont conduit à modifier la configuration du Q7 afin de le rendre compatible avec ce type d'utilisation. L'amplificateur D12 dans une configuration réglé sur le bafle Q7 introduit automatiquement un délai de 0.2 msec. dans le signal du Q7 afin de l'alligner avec la ligne source de Q1. nous recomandons un angle de couplage de 14°, qui est celui utilisé dans le progiciel Q-CalcRig lorsqu'un Q7 est séléctionné en tant que downfill. Ne pas oublier de positionner correctement par rotation, la trompe du bafle Q7.
Do you offer a longer splay link for Q7 loudspeaker?
Our tests have shown that a splay angle larger than 14° breaks up the wave front and the acoustical effects can be quite dramatic. Apart from this, it is physically not possible to use a longer front link as gravity will push the Q7 loudspeaker towards the front and totally misalign the array.
Can you fly two Q7s one above the other in standard orientation?
Use Z5020 Flying adapter 02 or Z5025 Flying adapter 03 attached to the Q7 M10 threads.
Can you fly two Q7s side by side in standard orientation?
Use Z5043 MAX Horizontal bracket connected together using the Z5044 MAX Bracket connector and Z5147 Rota clamp. Alternatively the Z5020 Flying adapter 02, Z5015 TV spigot 02 and Z5012 Pipe clamp for TV spigot can be employed.
Does Q-CalcRig and Stack include all Q-Series loudspeakers?
No, the spreadsheets contain the Q1, Q-SUB and enables a single Q7 to be used as a downfill in the Q-CalcRig version, however the Q10 loudspeaker is not included in either. These calculation tools are available in the Support/Downloads/Array calculators section of this website.
Can the Q Flying frame be used upside down to support a ground stack?
Yes, with the Q-SUBs placed on top of the frame it can be used to build a ground stack, for example of three Q-SUBs and two Q1s.
Are there Macintosh versions of the Q calculators?
Yes, the Q-CalcRig and Q-CalcStack calculators can both be run on Mac and Windows platforms.
What is the difference between the Qi loudspeakers and the standard Q loudspeakers?
Acoustically there is no difference at all. They only differ in cabinet hardware and front grill.
