E12-D Architectural specifications The 2-way, passive loudspeaker shall consist of a integrated 12”/1.3” exit coaxial driver design with neodymium magnet and constant directivity horn loading. The horn with its 110° x 50° (hor. x vert.) dispersion pattern shall be rotatable through 90° providing a 50° x 110° pattern. The sealed enclosure shall be injection molded with an impact resistant black finish. The drivers shall be protected by a rigid metal grill backed by an acoustically transparent foam. One handle each shall be incorporated in the top and bottom panel while a pole mount shall be incorporated in the bottom panel to accept a loudspeaker stand. M10 threaded inserts shall be incorporated to connect to different rigging accessories. The connection panel on the back shall be recessed and fitted with speakon NLT4 F/M sockets. NL4 or EP5 connectors as well as a fixed cable option shall be available upon request. Special colours according to RAL table as well as a weather resistant option shall be available upon request. The loudspeaker shall only be operated by a dedicated, compatible controller amplifier. The power handling capacity shall be 300 W RMS and 1600 W peak (10 ms). The frequency response (–5 dB) measured on axis shall be 50 Hz to 18 kHz with a maximum sound pressure of at least 133 dB. The dimensions shall not exceed 350 x 580 x 334 mm (13.77" 22.83x " 13.15x " - W x H x D) and shall weigh no more than 16 kg (35 lb). The loudspeaker shall be the E12-D by: d&b audiotechnik GmbH & Co. KG.