MAX2 Architectural specifications

Architectural specifications
The 2-way, passive stage monitor shall consist of an integrated 15"/1.4" coaxial driver combination with a passive crossover, using a single magnet assembly, providing a conical 75° constant directivity HF dispersion.
The loudspeaker shall only be operated by a dedicated, compatible controller amplifier.
The cabinet shall be constructed from marine plywood with an impact resistant paint finish.
The front of the loudspeaker cabinet shall be protected by a rigid metal grill in front of an acoustically transparent foam.
Each side panel shall incorporate a handle while four M10 threaded inserts shall allow connection to different rigging devices and brackets.
A pole mount shall be incorporated in one side panel to accept either a corresponding tripod or extension pole.
Two runners shall be recessed in the bottom panel to prevent cabinet movement and protect the bottom panel against scratching.
The cabinet shall be fitted with NLT4 F/M connectors.
The power handling capacity shall be 250 W RMS and 1600 W peak (10 ms). The frequency response (–5 dB) measured on axis shall be 55 Hz to 20 kHz with a maximum sound pressure of at least 135 dB.
The dimensions (W x H x D) shall not exceed 580 x 354 x 496 mm (22.8" x 14" x 19.5") and shall weigh no more than 23 kg (50 lb).

The loudspeaker shall be the MAX2 by: d&b audiotechnik GmbH & Co. KG.