MAX2 Architectural specifications The 2-way, passive stage monitor shall consist of an integrated 15"/1.4" coaxial driver combination with a passive crossover, using a single magnet assembly, providing a conical 75° constant directivity HF dispersion. The cabinet shall be constructed from marine plywood with an impact resistant paint finish. The front of the loudspeaker cabinet shall be protected by a rigid metal grill in front of an acoustically transparent foam. Each side panel shall incorporate a handle while four M10 threaded inserts shall allow connection to different rigging devices and brackets. A pole mount shall be incorporated in one side panel to accept a loudspeaker stand. Two runners shall be recessed in the bottom panel to prevent cabinet movement and protect the bottom panel against scratching. The cabinet shall be fitted with NLT4 F/M connectors. NL4 or EP5 connectors shall be available upon request. The loudspeaker shall only be operated by a dedicated, compatible controller amplifier. The power handling capacity shall be 250 W RMS and 1600 W peak (10 ms). The frequency response (–5 dB) measured on axis shall be 55 Hz to 20 kHz with a maximum sound pressure of at least 135 dB. The dimensions (W x H x D) shall not exceed 580 x 354 x 496 mm (22.8" x 14" x 19.5") and shall weigh no more than 23 kg (50 lb). The loudspeaker shall be the MAX2 by: d&b audiotechnik GmbH & Co. KG.