Architectural specifications

The 2-way dipolar, passive loudspeaker shall consist of two 6.5" low frequency driver with a neodymium magnet assembly and one1.4" exit neodymium compression driver mounted to a dedicated rotatable wave shaping device and a passive crossover network.
The loudspeaker shall only be operated by a dedicated, compatible controller amplifier.

The cabinet enclosure shall be made from polyurethane integral hard foam with an impact and weather protected PCP (Polyurea Cabinet Protection) finish.
Special colours according to RAL table and a weather resistant option shall be available upon request.
The drivers shall be protected by a rigid metal grill backed by an acoustically transparent foam.
The cabinet shall incorporate a three point rigging system for the assembly of vertical line source arrays of up to 24 cabinets in conjunction with a dedicated flying frame.

The connection panel on the back shall be fitted with two NL4 sockets (Fixed cable 5 m (16.4 ft) (H-07-RN-F 2 x 2.5 mm2/AWG 13) as weather resistant option(WR)).

The loudspeaker shall have a nominal horizontal dispersion angle of 105°. The vertical dispersion angle of the assembled array shall be determined by the geometry of the splay angles between the cabinets, which shall be adjustable in a range of 0° to 15° in 1° increments.

The power handling capacity shall be 200 W RMS and 800 W peak (10 ms). The frequency response (–5 dB) measured on axis shall be 68 Hz to 18 kHz with a maximum sound pressure of at least 132 dB.

The dimensions (WxHxD) shall not exceed 470 x 197 x 300 mm (18.5" x 7.75" x 11.8") and shall weigh no more than 11 kg (24 lb).

The loudspeaker shall be the Ti10L by: d&b audiotechnik GmbH & Co. KG.