V-SUB Architectural specifications

The loudspeaker shall be an integrated cardioid subwoofer consisting of a 18" driver in a bass-reflex design radiating to the front and a 12" driver in a two chamber bandpass design radiating to the rear, with both drivers to be powered by a single amplifier channel.
The loudspeaker shall only be operated by a dedicated, compatible controller amplifier.

The cabinet enclosure shall be made from marine plywood with an impact and weather protected PCP (Polyurea Cabinet Protection) finish.
The drivers shall be protected by a rigid metal grill backed by an acoustically transparent foam. The cabinet shall incorporate two handles in each side panel and four transport wheels at the cabinet's rear.
The cabinet shall incorporate a three point rigging system for the assembly of vertical arrays in conjunction with a dedicated flying frame.
The loudspeaker shall allow splay angle settings of 2.5° between adjacent cabinets.

The connection panel on the back shall be recessed and fitted with speakon NLT4 F/M sockets (NL4 M or EP5 connectors as an option).

The power handling capacity shall be 800 W RMS and 3200 W peak (10 ms). The frequency response (–5 dB) measured on axis shall be 37 Hz to 115 Hz with a maximum sound pressure of at least 137 dB.

The dimensions (WxHxD) shall not exceed 700 x 606 x 728 mm (27.5" x 23.8" x 28.6") and shall weigh no more than 64 kg (141 lb).

The loudspeaker shall be the V-SUB by: d&b audiotechnik GmbH & Co. KG.