Vi10P Architectural specifications The 3-way dipolar, passive loudspeaker shall consist of two 10" low frequency drivers, an integrated mid-range unit comprising one 8" midrange driver, all with a neodymium magnet assembly and one, coaxially mounted 1.4" exit neodymium compression driver coupled to a rotatable CD horn and a passive crossover network. The loudspeaker shall only be operated by a dedicated, compatible controller amplifier. The cabinet enclosure shall be made from marine plywood with an impact resistant black paint finish. Special colours according to RAL table and a weather resistant option shall be available upon request. The drivers shall be protected by a rigid metal grill backed by an acoustically transparent foam. The cabinet shall incorporate two M10 threaded inserts each, on the top, bottom and rear panel for the secure attachment of dedicated mounting brackets. The connection panel on the back shall be recessed and fitted with two speakon NL4 M sockets and a two pole screw terminal block. A cover plate for protection of the connection panel shall be included. The HF horn shall have a nominal dispersion of 110° x 40° (h x v). The power handling capacity shall be 500 W RMS and 2000 W peak (10 ms). The frequency response (–5 dB) measured on axis shall be 59 Hz to 18 kHz with a maximum sound pressure of at least 139 dB. The dimensions (WxHxD) shall not exceed 308 x 700 x 466 mm (12" x 27.5" x 18.3") and shall weigh no more than 33 kg (75 lb). The loudspeaker shall be the Vi10P by: d&b audiotechnik GmbH & Co. KG.