Yi10P Architectural specifications

The 2-way dipolar, passive loudspeaker shall consist of two 8" low frequency drivers with a neodymium magnet assembly and one 1.4" exit neodymium compression driver mounted to a rotatable CD horn and a passive crossover network.
The loudspeaker shall only be operated by a dedicated, compatible controller amplifier.

The cabinet enclosure shall be made from marine plywood with an impact resistant black paint finish.
Special colours according to RAL table and a weather resistant option shall be available upon request.
The drivers shall be protected by a rigid metal grill backed by an acoustically transparent foam.
The cabinet shall incorporate two M10 threaded inserts on the top and bottom panel for the secure attachment of dedicated mounting brackets.

The connection panel on the back shall be recessed and fitted with two speakon NL4 M sockets and a two pole screw terminal block. A cover plate for protection of the connection panel shall be included.

The HF horn shall have a nominal dispersion of 110° x 40° (h x v).

The power handling capacity shall be 400 W RMS and 1600 W peak (10 ms). The frequency response (–5 dB) measured on axis shall be 59 Hz to 18 kHz with a maximum sound pressure of at least 136 dB.

The dimensions (WxHxD) shall not exceed 257 x 580 x 341 mm (10" x 22.8" x 13.4") and shall weigh no more than 18 kg (40 lb).

The loudspeaker shall be the Yi10P by: d&b audiotechnik GmbH & Co. KG.