---

---

T10 loudspeaker

The T10 is a passive 2-way loudspeaker housing two 6.5" drivers positioned in a dipolar arrangement and a 1.4" HF compression driver and a passive crossover network. The T10 can be used both as a line array and as a high directivity point source loudspeaker. The HF driver is fitted to a unique waveguide horn producing vertical line source directivity with a 90° horizontal pattern that is maintained down to approximately 600 Hz. An acoustic lens placed in front of the horn widens horizontal dispersion to 105°, rotation of the horn by 90° relative to this produces an accurate point source dispersion transforming a vertically oriented T10 into a standalone full range loudspeaker with 90° horizontal and 35° vertical directivity pattern. The T10 cabinet is constructed from polyurethane integral hard foam, incorporates integrated line array rigging hardware and has an impact resistant finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam, and two EP5 or NL4 connectors wired in parallel are mounted on the rear panel.

---

Amplifiers

The T10 can be driven either by the d&b D6 or D12 dual channel power amplifiers configured for the T10. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.

---

Applications

Live music
Playback
Speech
Stage monitor
Subwoofer

---

Data

Components	2 x 6.5" / 1 x 1.4" exit compression driver on rotatable waveguide
Max. sound pressure (1m, free field) with D12	130 dB SPL in Point source configuration 132 dB SPL in Line/Arc configuration
Max. sound pressure (1m, free field) with D6	127 dB SPL in Point source configuration 129 dB SPL in Line/Arc configuration
Power handling capacity (RMS / peak 10 ms)	200 / 800 W
Frequency response (-5 dB)	68 / 120 Hz - 18 kHz
Nominal dispersion angle (point source, h x v)	90° x 35°
Nominal dispersion angle (line array, horizontal)	105°
Splay angle settings	0 - 15° (1° increment)
Cabinets per channel D6 / D12	4
Dimensions mm (H x W x D)	197 x 470 x 300
Weight kg	11
Dimensions inch (H x W x D)	7.7 x 18.5 x 11.8
Weight lb	24

---

Application information is presented for guidance only. We reserve the right to make any necessary changes to the products and the published specification. As part of our ongoing product development program we try, where possible, to maintain the highest degree of product compatibility.

---

	recommended use
	with subwoofer
	with a subwoofer suitable for music and high level program
	SPL max peak test signal: pink noise with crest factor 4
	standard/CUT mode

---

Downloads

---

Polar data

Array calculators

CAD drawings 2D/3D

Architectural specifications

---

Documentation

---

Order form for printed documentation from d&b.

---

Accessories

Available PDF documents for the accessories can be found in the table below the images.

---

Z5370 T Flying frame	Z5371 T Flying bracket	Z5372 T Horizontal bracket
Z5373 T Cluster bracket	Z5012 Pipe clamp for TV spigot	Z5010 TV spigot with fixing plate
Z5015 TV spigot for Flying adapter 02	Z5029 TV spigot	Z5354 E8/E12 Flying adapter
Z5355 E8/E12 Flying adapter link	Z5024 Loudspeaker stand adapter	Z5034 Stand adapter
Z5147 Rota clamp	Z5009 Loudspeaker stand with winder	Z5013 Loudspeaker stand winder M20
Z5375 T Base plate

---

---

• Top.
• Feedback.