The E4 is a lightweight 2-way passive loudspeaker using a neodymium LF driver and a coaxially mounted wide dispersion dome tweeter. It offers a wide symmetrical dispersion pattern in the horizontal and vertical plane while the cabinet may be mounted in either attitude. The E4 is intended for mobile near field applications for speech and music reinforcement in theatres, conferences, industrial presentations, broadcast studios and as surround sound, delay and fill systems. It can be used stand-alone or supplemented by different subwoofers from the E-Series. The highly compact sealed enclosure is injection moulded with an impact resistant black paint finish. The loudspeaker cabinet is weather protected and suitable for outdoor use as standard and is also available with a Special Colour (SC) option.
The E4 can be driven by either the d&b D6 or D12 dual channel power amplifiers configured for the E4. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.
|Components||4" driver / coaxially mounted 0.75” dome tweeter|
|Max. sound pressure (1m, free field) with D6 / D12||114 / 115 dB SPL|
|Power handling capacity (RMS / peak 10 ms)||60 / 400 W|
|Frequency response (-5 dB)||130 / 180 Hz - 20 kHz|
|Nominal dispersion angle (h x v)||100° conical|
|Cabinets per channel D6 / D12||4|
|Dimensions mm (H x W x D)||150 x 120 x 106|
|Dimensions inch (H x W x D)||5.9 x 4.72 x 4.2|
Application information is presented for guidance only. We reserve the right to make any necessary changes to the products and the published specification. As part of our ongoing product development program we try, where possible, to maintain the highest degree of product compatibility.
|SPL max peak test signal: pink noise with crest factor 4|
|Declaration of Conformity Loudspeaker/Amplifiers (CE)||Int||05.04.13||36 kB|
|E4/E5 Manual 1.3||English||11.05.12||930 kB|
|The E-Series brochure||English||19.03.13||4189 kB|
Order form for printed documentation from d&b.
Available PDF documents for the accessories can be found in the table below the images.
E4/E5 Ball joint adapter
Adapter M10 for Super clamp
Fixing plate M10
TV spigot M10
Pipe clamp for TV spigot
Stand adapter M10
Adapter M10 to 3/8”
|Z5029 TV spigot for Z5030/32/33, Mounting instructions||English||26.11.03||181 kB|
|Z5038 Fixing plate M10, Mountinginstr.||English||22.06.11||107 kB|
|Z5356 E4/E5 Ball joint adapter, Mounting instructions||English||27.03.13||150 kB|
Touring case 4 x E4
Touring case 8 x E4
|E7458 Touring case for
4 x E4 loudspeaker
4 x Z5356 Ball joint adapter
4 x E6532 Super clamp
|E7460 Touring case with
8 x E4 loudspeaker
8 x Z5356 Ball joint adapter
4 x E6532 Super clamp