---

---

M6 monitor

The M6 is a 2-way high performance stage monitor that produces 132 / 135 dB SPL when driven passively with the D6 / D12 respectivley or 138 dB SPL when driven actively with the D12. The constant directivity dispersion of 50° x 80° (h x v) delivers an accurately defined coverage area on stage and when used upright it is transformed into a powerful PA system with a dispersion suitable for a variety of applications. The M6 cabinet is constructed from marine plywood, which incorporates the handles, and has an impact resistant paint finish. It has two M10 threaded inserts on each side panel to enable quick and flexible rigging and a socket to accept loudspeaker stands. Two runners recessed in the bottom panel protect the cabinet from scratching and prevent movement.

---

Amplifiers

The M6 can be driven passively either by the d&b D6 or D12 dual channel power amplifiers configured for the M6 or actively by the D12 switched to 2-way Active mode. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.

---

Applications

Live music
Playback
Speech
Stage monitor
Subwoofer

---

Data

Components	12" driver with neodymium magnet / coaxial 1.3" exit compression driver with 3" coil and CD horn
Max. sound pressure (1 m, free field) with D6 in passive mode D12 in passive mode D12 in active mode	132 dB SPL 135 dB SPL 138 dB SPL
Power handling capacity (RMS / peak 10 ms)	400 / 1600 W
Frequency response (-5 dB)	65 / 100 Hz - 17 kHz
Nominal dispersion angle (h x v)	50° x 80° CD
Cabinets per channel D6 / D12 (passive mode)	2 / 2
Cabinets per D12 (active mode)	2
Dimensions mm (H x W x D)	332 x 486 x 455
Weight kg	16
Dimensions inch (H x W x D)	13.1 x 19.1 x 18
Weight lb	35

---

Application information is presented for guidance only. We reserve the right to make any necessary changes to the products and the published specification. As part of our ongoing product development program we try, where possible, to maintain the highest degree of product compatibility.

---

	recommended use
CD	loudspeaker with constant directivity horn
	with subwoofer
	with a subwoofer suitable for music and high level program
	SPL max peak test signal: pink noise with crest factor 4
	standard/CUT mode
	with floor coupling
	horn 90° rotatable
	in applications with low continuous levels or low ambient temperatures up to three loudspeakers per channel D12 may be connected
	overall dimensions (projected footprint)

---

Downloads

---

Polar data

CAD drawings 2D/3D

Architectural specifications

---

Documentation

---

Order form for printed documentation from d&b.

---

Accessories

Available PDF documents for the accessories can be found in the table below the images.

---

Z5010 TV spigot with fixing plate	Z5024 Loudspeaker stand adapter	Z5012 Pipe clamp for TV spigot
Z5057 M6 Flying bracket	Z5044 MAX Bracket connector	Z5047 MAX12 Horizontal bracket

---

---

FAQs

Please find the specified FAQs here.

---

• Top.
• Feedback.