---

---

27S subwoofer

The 27S-SUB is a compact high performance cardioid subwoofer powered by a single amplifier channel and is for use with the xS-Series and xA-Series loudspeakers. The cabinet houses two long excursion neodymium drivers in an integrated cardioid setup: a 15“ driver in a bass-reflex design facing to the front and a 12” driver in a two chamber bandpass design radiating to the rear. It can be used stand-alone, stacked or individually flown. The enclosure is constructed from marine plywood with an impact resistant black paint finish and is Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Incorporated into the side panels are a pair of M10 threaded inserts and into the rear panel are two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP34 rating, and enables operation of loudspeakers in changing ambient conditions.

---

Amplifiers

The 27S-SUB is driven by either the d&b D6 or D12 dual channel power amplifiers configured for the 27S-SUB. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.

---

Data

Configuration	Passive cardioid subwoofer
Components	15" driver with neodymium magnet 12" driver with neodymium magnet
Max. sound pressure (1m, free field) with D6 / D12	128 / 131 dB SPL
Power handling capacity (RMS / peak 10 ms)	500 / 2000 W
Frequency response (-5 dB)	40 Hz - 140 / 100 Hz
Cabinets per channel D6 / D12	2
Dimensions mm (H x W x D)	490 x 580 x 700
Weight kg	41
Dimensions inch (H x W x D)	19.3 x 22.8 x 27.6
Weight lb	90

---

Application information is presented for guidance only. We reserve the right to make any necessary changes to the products and the published specification. As part of our ongoing product development program we try, where possible, to maintain the highest degree of product compatibility.

---

	recommended use
	SPL max peak, test signal: pink noise with crest factor 4
	100 Hz mode

---

Downloads

---

CAD drawings 2D/3D

Architectural specifications

---

Documentation

---

Order form for printed documentation from d&b.

---

Accessories

Available PDF documents for the accessories can be found in the table below the images.

---

Z5410 Horizontal bracket 18S/27S-SUB	Z5010 TV spigot with fixing plate	Z5012 Pipe clamp for TV spigot

---

---

• Top.
• Feedback.