Puente de red de audio DS20

Puente de red de audio DS20, vista frontal
Puente de red de audio DS20, vista isométrica
Puente de red de audio DS10, vista trasera

Puente de red de audio DS20

Interfaz entre los amplificadores d&b y el protocolo de transporte de audio Milan

  • 16 canales de salida digital AES3
  • 4 canales de entrada digital AES3
  • Conmutador integrado de red de 5 puertos completamente habilitado para AVB

Product description

The DS20 Audio network bridge interfaces between Milan networks and AES3 digital audio signals, while also providing distribution of Ethernet control data. This 1 RU device integrates directly into the d&b system approach, positioned in front of the amplifiers within the signal chain, and is ideally suited to both mobile and installation environments. The DS20 sends metadata including Milan channel labels and cabling information via the AES3 channel stream to the d&b four channel amplifiers. As well as providing an interface from the Milan audio network to the digital inputs of the d&b amplifiers via Ethernet, the DS20 provides four digital AES3 input channels for applications such as a break in from a Front of House console.

The DS20 incorporates a fully AVB-enabled integrated 5-port switch, offering a primary and redundant network for the Milan protocol. This provides extended connectivity for a laptop to control the d&b amplifiers using the R1 Remote control software via the OCA (Open Control Architecture) protocol. Using the DS20 Audio network bridge, audio signals and remote control data can be combined using a single Ethernet cable. The front panel of the DS20 is designed to match the I/O panel of the d&b Touring rack assemblies. This ensures a simple integration within existing system configurations. The DS20 features a power supply suitable for mains voltages 100 V – 240 V, 50 – 60 Hz, with Overvoltage protection of up to 400 V.

Architectural specifications for detailed project planning

Do you require architectural specifications? For a d&b system or a specific d&b Series? Here are the most important technical specifications ready for download.

Controles e indicadores
Mode
Push-button
Modos de puerto del switch/pérdida de audio
RGB LEDs
BYPASSED/SUBSCRIBED (RX Subscription)
LED indicator green
IDENTIFY/SYNC ERROR
LED indicator red
Entradas digitales
DIGITAL IN
4 channel (2 x AES3)
3 pin XLR female
Muestreo
32 - 192 kHz
Sincronización
Sampling Rate Converter (SRC)
Salidas digitales
DIGITAL OUT
16 channels (8 x AES3)
3 pin XLR male
Muestreo
48 / 96 kHz
Sincronización
Milan network
Red
Conectores
etherCON®
built-in 5-port AVB Ethernet switch
100/1000 Mbit
Condiciones de funcionamiento
Intervalo de temperaturas
0 °C ... 40 °C / 32 °F ... 104 °F
Temperatura de almacenamiento
–20 °C ... 70 °C / –4 °F ... 158 °F
Humedad (rel.), promedio a largo plazo
70%
Fuente de alimentación
Conector eléctrico
powerCON®
Protección contra la sobretensión
Up to 400 VAC
Voltaje nominal de la red
100 - 240 V, 50 - 60 Hz
Dimensiones/peso
Dimensiones (Al x An x Pr)
1 RU x 19“ x 232 mm
1 RU x 19" x 9.1"
Peso
3.8 kg / 8.37 lb
¿Buscas un contacto de ventas en tu país?buscar un distribuidor ahora

More of Processing & Matrix