U5N loudspeaker

U5N loudspeaker front view
U5N loudspeaker rear view

U5N loudspeaker

Point source

Networked 2-way compact dipole loudspeaker

  • Components 2 x 6.5" / 1"
  • Dispersion 90° x 60° rotatable
  • SPLmax 133 dB
  • Weight 12 kg / 26.5 lb

Article number Z2010

Where to buy

Product description

The U5N is a high-performance, 2-way loudspeaker providing exceptional directivity control and electroacoustic efficiency. Suitable for both mobile and installation applications, this point-source networked cabinet represents the next generation of d&b technology and innovation. It features dual 6.5" drivers in a bipole arrangement with a 1" compression driver mounted onto a 90° x 60° horn that can be rotated 90° without an extra tool (patent pending). The U5N leverages new industrial design and manufacturing techniques for state-of-the-art horn geometry and advanced bass-reflex ports to deliver full bandwidth and extended LF output (-5 dB @ 55 Hz). The U5N loudspeaker provides 60° vertical directivity control starting from 500 Hz, matched with a horizontal dispersion of 90°. 

The U5N supports hybrid topology schemes and accepts either AC or PoE++, as well as both power sources simultaneously, enabling the mixing of passive and networked workflows controlled as one system. A single network cable can supply the loudspeaker with power, signal, remote monitoring and control, or two will provide triple dual redundancy (2 x PoE++, 2 x Milan and 2 x d&b’s R1 control software).

The cabinet is made of highly durable partially recycled ABS and carries an IP54 rating for dust and weather resistance. The front is protected by a rigid metal grille and an acoustically transparent foam. The back has a handle and M10 threated inserts for attaching d&b rigging hardware designed specifically for either mobile or install uses. The U5N can be both mounted or flown, and in single-cable operation it can easily be placed where traditional power is not easily available, bringing significant savings in time and infrastructure costs. When operating on PoE++ U5N can be powered by DN2, the d&b proprietary AVB MILAN PoE++ Network Switch for a rugged, reliable solution or other 3rd party switches with equivalent performance capabilities and certifications.

The U5N is also available in a passive variant (U5).

System data
Frequency response (-5 dB standard)
58 Hz - 17 kHz
Frequency response (-5 dB CUT mode)
105 Hz - 17 kHz
Frequency response (-10 dB standard, IEC60268)
52 Hz - 18 kHz
Frequency response (-10 dB CUT mode, IEC60268)
75 Hz - 18 kHz
Max. sound pressure1
133 dB
Loudspeaker data
Nominal dispersion angle (h x v)
90° x 60°
Components
2 x 6.5" driver with neodymium magnet
1 x1" exit HF compression driver with 1.7" coil
Rotatable CD horn
Digital Signal Processing
Equalizer
2 user definable 16-band equalizer
Latency analog input
1.1 ms
Frequency generator
Pink noise or sine wave 10 Hz to 20 kHz
Delay
1.1 ms to 1 sec.
Connectors
INPUT ANALOG
3 pin XLR female
ANALOG LINK
3 pin XLR male, parallel to input
MILAN INPUT
1 stream with up to 8 channels @ 48/96 kHz
Network Connection
2 x RJ 45 (etherCON®)
Network Switch
integrated 2-port, 100 Mbit/1 Gbit
ETH1/PRI
Milan™, Remote control via R1 star topology
ETH2/SEC
Milan™ redundancy only, no remote control star topology
Power supply
Mains connector
powerCON® TRUE1 TOP In and Thru
Power supply
Switched mode power supply with automatic mains range selection and active Power Factor Correction (PFC).
Rated mains voltage
100 - 240 V, 50 - 60 Hz
Dimensions / weight
Dimensions (h x w x d)
20 x 8.8 x 11.6"
509 x 223 x 295 mm
Weight
26.5 lb
12.0 kg

1 1m, free field. SPL max peak test signal: pink noise with crest factor 4

Looking for a sales contact in your country? find a reseller now