Installation specific medium to large format 3-way line array loudspeaker
- Components LF: 2 x 10" + 2 x 8"; MF: 1 x 8"; HF: 2 x 1.4" exit compression driver with 3" coil
- Dispersion 120°
- SPLmax 144 dB
- Weight 57 kg / 126 lb
Article number Z0791
The KSLi12 is the installation variant of the KSL12 line array loudspeaker for medium to large scale sound reinforcement. The KSLi12 line array module produces an 120° constant directivity dispersion pattern in the horizontal plane over the entire operating bandwidth. The KSLi12 houses two 10" neodymium forward facing LF drivers and two side firing 8" neodymium LF drivers. A coaxial mid-high section contains an MF horn with an 8" driver and two 1.4" exit, 3" voice coil HF compression drivers mounted to a dedicated wave shaping device. SL-Series flying hardware comes with a patented workflow with integrated tension rigging mode, allowing splay angles between cabinets from 0° to 10° in 1° increments. The loudspeakers are driven actively by two channels of an appropriate d&b amplifier. One channel powers the 10” LF drivers, the second channel powers all other components, which are passively crossed-over. This component geometry allows for a smooth crossover design with well-defined overlaps between adjacent bands providing consistent, even and very accurate horizontal dispersion. Due to the arrangement of the front and side firing LF drivers, seamless directivity control is maintained from the lowest frequencies the loudspeaker produces to above 18 kHz. Further expanding flexibility and catering for applications where smaller arrays are used and ArrayProcessing is not required, the KSLi12 includes the option to link two cabinets in Line or Arc mode. The cabinets are constructed from marine plywood and have an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front and side panels incorporate rigid metal grills backed by an acoustically transparent and water repellent fabric.
The following amplifiers can be used to drive the KSLi12.
2 x 8" side LF driver
1 x 8" MF driver
2 x 1.4" exit compression driver with 3" voice coil
Passive crossover network
13 x 39.4 x 22.5"
1 1 m, free field, SPL max peak, Broadband signal IEC 60268, one speaker driven