04.02.19

d&b audiotechnik introduces control simplicity with the d&b R90 Touchscreen remote control.

1/5
2/5
3/5
4/5
5/5

At Integrated Systems Europe (ISE) 2019 d&b introduces the R90 Touchscreen remote control. The product expands the d&b Workflow in dedicated permanently installed applications where adjustments to a d&b audio system must be performed by staff with limited technical knowledge.

Simplifying the general operation of a d&b system, the 7” panel PC grants any user one-touch control of predefined functions – power, mute, level, grouping and recall of up to nine AmpPresets.

All control functions in R90 work independently of the d&b R1 Remote control software, eliminating the possibility of accidentally altering any of the carefully balanced system settings.

“An installed sound system can be quite comprehensive, so d&b wanted to develop a tool that would open up its general operation to non-technical venue staff,” explains d&b Product Manager Wolfgang Schulz. “The R90 enables most of the functions you would need to use on a daily basis to be accomplished with one touch. Of course, it also had to be something that was also simple for system integrators to incorporate into either a new or pre-existing installation.”

Setup and configuration of R90 project settings can be accomplished quickly and easily, after which everyday activities can be managed without a technician present. Running AES70/OCA, the R90 Touchscreen remote control can be easily integrated into any d&b system (using up to fifteen amplifiers) without the need for additional programming.

The hardware consists of a 7" touch screen (800 x 480 pixel) Industrial PC (IPC) device. It incorporates a 1GHz ARM Cortex-A8 processor and provides a steel housing with aluminum front. All connectors are accessible from the lower rear panel. A low installation depth and pull-out clamping levers facilitate easy mounting, without any loose parts.

R90 is part of the d&b Workflow, an extension of the d&b System reality and designed to work in complete harmony with d&b amplifiers and provides a complete installation package consisting of impeccable sound quality and ease of use.

share this site

Related press releases

25.01.24

d&b audiotechnik pushes the boundaries of audio networking at NAMM and ISE 2024.

The new range of MILAN-enabled products being showcased includes the DS20 Audio Networking Bridge, the DS100M Signal Engine and the D90 power amplifier.

read more
06.12.23

New d&b En-Snap software version 3 focuses on creative workflows for immersive live applications.

En-Snap, the d&b Soundscape cue automation and show control software provided in collaboration by d&b and Gareth Owen Sound, has been given a major upgrade and is now available to all Soundscape users as En-Snap V3.

read more
05.12.23

d&b En-Bridge software enhances Soundscape's interoperability with 3rd party systems.

En-Bridge is a standalone software available for Windows and MacOS that provides OSC bridging and 3rd party protocol translation for remote control of Soundscape parameters on the DS100 signal engine.

read more
20.07.23

d&b audiotechnik announces the latest version of its advanced simulation software.

d&b audiotechnik, a provider of professional audio technology, has announced the latest version of NoizCalc 4.0 software.

read more
31.01.23

d&b audiotechnik’s new HeadroomCalc technology takes center stage at ISE 2023.

Available in ArrayCalc V11, the patent-pending HeadroomCalc technology now predicts the reaction of a d&b system to a specific audio signal, providing a more precise sound pressure level (SPL) and headroom calculation than any other solution...

read more
31.01.23

d&b audiotechnik introduce EN 54-24 compliant loudspeakers and EN 54-16 audio solutions.

Underscoring its commitment to providing premium solutions that meet critical safety standards, d&b now offers a range of EN 54-24 compliant loudspeakers and EN 54-16 compliant audio solutions to better serve the needs of its customers. These...

read more
10.05.22

d&b to showcase all-new technologies at ISE 2022, including compact and powerful XSL System and 5D amplifier with integrated audio networking.

d&b audiotechnik is showcasing a full range of installation-specific technology and design solutions at ISE 2022 stand #7S350. Attendees will be able to experience first-hand the all-new 5D installation amplifier; d&b’s EN 54 compliant solutions, and...

read more
09.11.21

Soundscape simulated: New En-Scene simulation tool from d&b marks radical development in the way spatialized sound is modelled.

d&b audiotechnik today announced the latest addition to its powerful software toolkit - Soundscape Simulation, SPL and localization mapping within an object based workflow.

read more
21.09.21

More SL Nothing less - d&b introduces the XSL System compact line array, full system solution, to complete the SL- Series family.

The new d&b XSL System scales the industry-leading features of the extraordinary SL-Series into a smaller, lighter-weight, more energy efficient, package. Matching great power with unparalleled control, for the broadest range of applications.

read more
23.06.21

Introducing the D40 amplifier; the next stage of applied evolution.

d&b audiotechnik launched the new D40 mobile amplifier featuring reduced size and weight, advanced voltage management, and increased system performance while significantly reducing power consumption for improved environmental friendliness.

read more
18.02.21

d&b audiotechnik further advances sound design and acoustic emulation capabilities of the d&b Soundscape.

d&b today announced new advanced features for their industry-leading Soundscape immersive audio system, further developing the capability of the unrivaled, high-performance, multichannel toolkit for venues and events of all sizes.

read more
14.12.20

d&b audiotechnik partners with Gareth Owen Sound to advance Soundscape.

German audio technology and solution company d&b audiotechnik has partnered with Gareth Owen Sound to launch En-Snap cue automation software, a significant step in advancing the application of the immersive sound experience that is Soundscape

read more
13.10.20

d&b and Autograph partner to launch d&b Fanblock – powered by Autograph Stadium Sound

d&b have announced a partnership with leading creative sound designer Autograph to launch a stadium sound application, creating a live crowd atmosphere at empty sports events.

read more
14.09.20

d&b audiotechnik continues loudspeaker innovation leadership with the new flush mountable, high-performance, flexible 44S loudspeaker.

d&b audiotechnik today announced the introduction of an innovative new addition to the company's extensive product repertoire, the 44S loudspeaker. The 44S is d&b’s first ever flush mountable cabinet, delivering compact, high performance audio and a...

read more
11.06.20

d&b Soundscape Builds On Market-Leading Capabilities for Immersive Audio.

d&b audiotechnik announced a new set of performance enhancing capabilities for the company’s market-leading d&b Soundscape audio platform. The latest updates to the platform further enhance a user’s ability to deliver outstanding multi-dimensional...

read more

d&b delivers high performance installation with the new KSLi System at ISE 2020.

d&b audiotechnik brings the most comprehensive range of installments and applications yet to ISE2020 with the introduction of the KSLi System. The KSLi System features new 40D high performance installation amplifiers which allows system integrators...

read more
06.01.20

d&b welcomes the KSL-SUB to the SL family at NAMM 2020.

d&b announce the newest addition to the SL-Series. The KSL-SUB will make its debut at NAMM Show 2020 in California, in January.

read more
12.06.19

InfoComm 2019: Introducing the d&b audiotechnik A-Series augmented array loudspeakers.

The all new A-Series from d&b audiotechnik introduces the augmented array: an advanced loudspeaker concept born from the d&b applied evolution system development philosophy.  Combining variable splay angles, two approaches to acoustic optimization,...

read more
02.04.19

d&b audiotechnik introduces the bitesized B8-SUB at Prolight + Sound 2019

Prolight + Sound 2019 sees the introduction of the B8, an ultra compact subwoofer from d&b audiotechnik.

read more
04.02.19

d&b Revit files strengthen support for Building Information Modelling.

With the increasing importance of Building Information Modelling (BIM) and the widespread adoption of Revit software, d&b audiotechnik has made available Revit files that allow consultants, architects and system integrators to include d&b...

read more
04.02.19

d&b audiotechnik launches its first Milan product the DS20 Audio Network Bridge.

Integrated Systems Europe 2019 sees the launch of the d&b audiotechnik DS20 Audio network bridge, the company’s first product offering for connecting its loudspeaker systems to the open standards based Milan protocol.

read more
12.12.18

d&b audiotechnik announces SL-Series KSL System at NAMM 2019.

d&b announces the imminent arrival of a new addition to its familial line array, the SL-Series. The KSL System will be at the NAMM show in California, from 24 January 2019.

read more
18.04.18

DiGiCo, Avid and Lawo join the d&b Soundscape family bringing seamless console integration to the revolutionary system processor.

As the d&b Soundscape continues to draw attention worldwide, d&b audiotechnik has announced a series of landmark integrations between Soundscape’s central DS100 Signal Engine and digital mixing consoles from leading manufacturers DiGiCo , Avid and...

read more

d&b SL-Series - the GSL System introduced at Prolight + Sound 2018.

Prolight + Sound 2018 sees the launch of the d&b audiotechnik SL-Series, GSL System, a new loudspeaker system sitting right at the top of the company product portfolio.

read more
22.02.18

d&b audiotechnik announces first integration partners for Soundscape.

Coinciding with the launch of the d&b Soundscape system, audio technology specialist d&b audiotechnik has announced the first integrations of the powerful DS100 Signal Engine. The integrations, with QLab by Figure 53 and TTA Stagetracker II by TTA,...

read more
15.02.18

Introducing the d&b Soundscape: the evolution of the listening experience.

After almost 5 years in development and with extensive field testing by some of the world’s leading artists and venues, d&b has officially launched the d&b Soundscape. Based on an exceptional audio system processor and two software modules, the d&b...

read more

The d&b Soundscape official release at a buzzing ISE 2018.

ISE 2018 at RAI Amsterdam, Netherlands, was a milestone event in a five year journey for d&b, as it is where the d&b Soundscape was officially released to the market. Operating on the DS100 Signal Engine and dynamically integrating engineering and...

read more
12.04.17

d&b audiotechnik launches two new software features at Prolight + Sound 2017.

Array verification has been created to help avoid cabling mistakes in both mobile and permanent applications in the latest version of the d&b R1 Remote control software.

read more
30.01.17

d&b audiotechnik introduces amplifier plug-in for Peavey MediaMatrix.

Compatibility and interoperability is key for d&b, who will launch an amplifier plug-in for the Peavey MediaMatrix NION DSP and nControl PC at the ISE Amsterdam exhibition in February 2017.

read more
28.09.16

d&b audiotechnik introduce new loudspeaker solutions for permanent installation

The new 24S and 24S-D point source loudspeakers from d&b audiotechnik are set to conquer permanent applications including night clubs, live performance venues, houses of worship, multipurpose centres and sports venues.

read more

d&b audiotechnik launches software plug-in for QSC Q-SYS at InfoComm 2016.

At InfoComm 2016 d&b audiotechnik will introduce its software plug-in for the Q-SYS™ platform from QSC®, LLC enabling the comprehensive control and monitoring of d&b amplifiers and loudspeakers from any Q-SYS Core. 

read more
05.04.16

d&b launches NoizCalc: the far field immission modelling software tool.

In recent years the prediction and control of far field noise immission from live open air events has become a serious topic. Gaining permission and licensing to stage such productions often requires an official statement, predicting how the noise...

read more
01.09.15

A new breed of point source loudspeakers from d&b audiotechnik.

The demands for a high performance point source have always been the same: reliable, lightweight and compact, and with a wide range of rigging options for maximum flexibility.

read more
15.06.15

InfoComm marks the launch of the eagerly anticipated installation specific d&b amplifiers.

At InfoComm 2015 d&b audiotechnik introduces its newest four channel, 2 RU amplifiers. The 10D and 30D are the first d&b amplifiers tailored for permanent integration.

read more
16.04.15

ArrayCalc V8 simulation software, featuring ArrayProcessing: further elevates the performance of d&b line arrays.

German loudspeaker system manufacturer, d&b audiotechnik, has today released ArrayCalc V8, featuring ArrayProcessing. This software update further elevates the already excellent sound of the large format d&b J-Series as well as the V-Series and...

read more
16.04.15

Prolight + Sound 2015: the new d&b audiotechnik MAX2 stage monitor offers clarity and consistency.

Stepping up to the stage at Prolight + Sound 2015 in Frankfurt, the new MAX2 stage monitor from d&b audiotechnik provides clarity to performing artists in every genre.

read more
16.04.15

Prolight + Sound 2015: the new d&b audiotechnik D20 amplifier offers performance and ease of use.

At Prolight + Sound 2015 in Frankfurt, d&b audiotechnik introduces the newest four channel, two rack unit (2RU) amplifier: the D20. The new amplifier features proven, intuitive user interfaces and offers fast, responsive remote control and monitoring...

read more
01.09.14

Not just any old workhorse: the absolute Y-Series from d&b.

The new Y-Series from d&b audiotechnik provides flexible and configurable solutions for any small to medium sized sound reinforcement requirement, whatever the application style. While the Y7P and Y10P loudspeakers cover point source duties, with the...

read more
26.08.14

d&b audiotechnik puts Open Control Architecture (OCA) in the field.

The first product to prove the Open Control Architecture (OCA) in the field, the D80 amplifier from d&b audiotechnik, was already an innovative product with many features and benefits making it immediately attractive to the d&b user community. Why...

read more
14.02.14

The d&b audiotechnik D80 amplifier

More refined than anything before, the powerful four channel D80 amplifier sits right at the very heart of any d&b audiotechnik system.

read more