AL60 loudspeaker

AL60 loudspeaker

Augmented arrays

Medium format 2-way augmented array loudspeaker

  • Components 2 x 10" LF driver, 1 x 1.4” exit compression driver with 3" coil
  • Dispersion 60° x 30°
  • SPLmax 139 dB
  • Weight 23 kg / 51 lb

Product description

The AL60 is an augmented array loudspeaker for medium scale sound reinforcement. When the AL Flyingframe is used, up to four cabinet modules can be flown in vertical columns producing a 60° constant directivity dispersion pattern in the horizontal plane. The AL60 can also be applied as horizontal array of maximum four loudspeakers using the AL Flying adapter.  The AL60 loudspeaker module is a passive 2-Way design housing two x 10" neodymium LF drivers and one 1.4" exit HF compression driver with a 3" diaphragm mounted to a dedicated wave shaping device and a passive crossover network. The wave segments of each cabinet couple without gaps and sum up coherently. Variable splay angles between adjacent cabinets can be set in a range of +/- 10° in 5° increments resulting in a total coverage of 50° up to 70° for two cabinets, up to a maximum of 150°per array. All components are arranged symmetrically around the center axis of the cabinet to produce a perfect symmetrical dispersion pattern. Broadband horizontal dispersion control is maintained down to approximately 550 Hz. The cabinet is constructed from marine plywood with an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent fabric.

Amplifiers

The d&b D20 and 30D amplifier can both be used to drive the AL60.

D20

30D

Architectural specifications for detailed project planning

Do you require architectural specifications? For a d&b system or a specific d&b Series? Here are the most important technical specifications ready for download.

System data
Frequency response (-5 dB standard)
60 Hz - 18 kHz
Frequency response (-5 dB CUT mode)
105 Hz - 18 kHz
Max. sound pressure1
with D20/30D
with D80

138 dB
139 dB
Cabinets per amplifier channel
2
Loudspeaker data
Nominal dispersion angle (h x v - horizontal setup)
60 ° x 30 °
Nominal impedance
8 ohms
Power handling capacity (RMS/peak 10 ms)
400/1800 W
Splay angle settings
20 … 40° (5° increment)
Components
2 x 10" LF driver
1 x 1.4" exit compression driver with 3" coil
Passive crossover network
Connections
1 x NLT4 F/M
Dimensions / weight
Dimensions (H x W x D)
322 x 700 x 356 mm
12.7 x 27.6 x 14"
Weight
23 kg
50.7 lb

1 1 m, free field, SPL max peak test signal: pink noise with crest factor 4

Looking for a sales contact in your country?find a reseller now