10A loudspeaker

10A loudspeaker front
10A loudspeaker front line array
10A loudspeaker back upright
10A loudspeaker front
10A loudspeaker front line array
10A loudspeaker back upright

10A loudspeaker

Point sources

Installation specific arrayable 2-way point source loudspeaker

  • Components 10"/1.4"
  • Dispersion 75° x 50° rotatable
  • max SPL 130 dB
  • Weight 14 kg / 31 lb

Product description

The biaxial 10A/10A-D are high performance 2-way point source loudspeakers housing a single 10” driver in a bass-reflex enclosure with different HF sections. They are lightweight passive designs using neodymium drivers and large horns for accurate pattern control, with rotatable dispersion characteristics of 75° x 50° and 110° x 55° respectively. Both loudspeakers are equipped with a 1.4” exit compression driver. With their frequency response from 60 Hz to 18 kHz both versions can be used as full range systems and can also be supplemented by different subwoofers from either the xS or xA-Series. The 18A or 27A subwoofers can also be integrated into the array. The enclosures are constructed from marine plywood with an impact resistant black paint finish and are Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The side panels have an integrated rigging system and the rear panel incorporates two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.

Amplifiers

The d&b 30D amplifier is recommended to drive the 10A. The d&b D20, D80, 10D and D6 can also be used.

30D

Architectural specifications for detailed project planning

Do you require architectural specifications? For a d&b system or a specific d&b Series? Here are the most important technical specifications ready for download.

System data
Frequency response (-5 dB standard)
60 Hz - 18 kHz
Frequency response (-5 dB CUT mode)
100 Hz - 18 kHz
Max. sound pressure (1m, free field)1
with D6/10D
with D20/30D
with D80

127 dB
130 dB
130 dB
Cabinets per amplifier channel
3
Loudspeaker data
Configuration
Installation specific arrayable 2-way point source loudspeaker
Nominal impedance
12 Ω
Power handling capacity (RMS/peak 10 ms)
200/1200 W
Nominal dispersion angle (h x v)
75° x 50° rotatable
Components
10" driver with neodymium magnet
1.4" compression driver with CD horn
passive crossover network
Connections
2 x NL4
screw terminal block
Dimensions / weight
Dimensions (H x W x D)
283 x 580 x 350 mm
11.1 x 22.8 x 13.8"
Weight
14 kg
31 lb

1 SPL max peak test signal: pink noise with crest factor 4

Application information is presented for guidance only. d&b reserves the right to make any necessary changes to the products and the published specifications. As part of the ongoing development program d&b tries to maintain the highest degree of product compatibility.

 
Release
Category
File type
Size
Language
 
The xA-Series brochure
12.06.2018
Brochures
PDF
3 MB
English
3D CAD drawings - 10A / 10AL
11.05.2018
CAD Data 2D/3D
ZIP
96 KB
2D CAD drawings - 10A/10A-D
09.05.2018
CAD Data 2D/3D
ZIP
30 KB
EU Declaration of Conformity (CE)
06.03.2018
Other documentation
PDF
53 KB
English
xA-Series Rigging manual 1.2
27.02.2018
Manuals
PDF
2 MB
English
10A/10A-D Manual 1.3
04.10.2016
Manuals
PDF
1 MB
English
Similar applications
All categories

d&b applications

Mobile application or fixed installation? Indoors or outdoors? Large or small? d&b provides tailored-made solutions for each and every requirement. What is more, the dedicated simulation software optimizes the planning of the system installation.
view all applications
Looking for a sales contact in your country?find a reseller now