Y12 loudspeaker
Y12 loudspeaker
Line arrays
High performance 2-way passive line array loudspeaker
- Components 2 x 8"/1.4"
- Dispersion 120°
- SPLmax 139 dB
- Weight 20 kg / 44 lb
Product description
The compact Y12 line array loudspeaker is designed for use in vertical columns. The 2-way passive design features two 8” drivers in a dipole arrangement and a centrally mounted 1.4” compression driver with a wave transformer. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These high performance line array modules offer 120° horizontal directivity controlled down to 500 Hz. The mechanical and acoustical design enables vertical arrays of up to twenty four loudspeakers with vertical splay angles from 0° to 14° with a 1° resolution. It can be used in columns of purely Y12 loudspeakers or combined with Y8 and/or Y-SUB cabinets. The loudspeaker cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle while two additional recessed grips are provided at the rear. Three point rigging hardware is integrated into the loudspeaker enclosure.
Amplifiers
The d&b D80 amplifier is recommended to drive the Y12. The d&b D20, 10D, 30D and D6 can also be used.
Architectural specifications for detailed project planning
Do you require architectural specifications? For a d&b system or a specific d&b Series? Here are the most important technical specifications ready for download.
with D6/10D
with D20/30D
with D80
134 dB
137 dB
139 dB
1.4" exit compression driver
passive crossover network
optional 2 x NL4 or 2 x EP5
10 x 24.8 x 14.8"
44 lb
1 1 m, free field, SPL max peak test signal: pink noise with crest factor 4