Installation specific high performance flyable cardioid subwoofer
- Components 18"/12"
- Dispersion Cardioid
- SPLmax 134 dB
- Weight 49 kg / 108 lb
Article number Z0719
The Yi-SUB is an actively driven cardioid subwoofer powered by a single amplifier channel. The Yi-SUB is the installation version of the Y-SUB and differs only in cabinet construction, finish and mounting hardware. It houses two long excursion neodymium drivers in an integrated cardioid setup, an 18” driver in a bass-reflex chamber facing to the front and a 12” driver in a two chamber bandpass design radiating towards the rear. The cardioid dispersion pattern resulting from this arrangement avoids the distribution of energy behind the system, providing the greatest accuracy of low frequency reproduction and reducing the energy dispersed into unwanted areas. The Yi-SUB is fitted with three point rigging hardware and can be flown in a column of purely Yi subwoofers, at the top of a Yi array or used in a ground stacked setup. The cabinet is constructed from marine plywood and has an impact resistant paint finish, while Weather Resistant (WR) and Special Color (WR) versions are available. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.
The d&b D80, 30D and 40D amplifiers are recommended to drive the Yi-SUB. The d&b D20, 10D and D6 can also be used.
Architectural specifications for detailed project planning
Do you require architectural specifications? For a d&b system or a specific d&b Series? Here are the most important technical specifications ready for download.
1 x 12" driver with neodymium magne
screw terminal block
19.7 x 24.8 x 27.6"
1 1 m, free field, SPL max peak test signal: pink noise with crest factor 4