D20 amplifier

D20 amplifier isometric view
D20 amplifier front view
D80 amplifier rear view
D20 amplifier in rack
D20 amplifier isometric view
D20 amplifier front view
D80 amplifier rear view
D20 amplifier in rack

D20 amplifier

Four channel amplifier

  • Maximum output power
    4 x 1600 W into 4 Ω
  • All current d&b loudspeaker
    setups except J-Series, M2, SL-Series
  • Display Colour TFT touchscreen, 3.5"/320 x 240 pixel

Product description

The 2 RU four channel D20 amplifier is ideally suited to mobile and installation applications which require low to medium Sound Pressure Level (SPL) capabilities. The D20 features the same Digital Signal Processing (DSP) platform as the latest generation of d&b amplifiers, containing configurations for all d&b loudspeakers except the J-Series and the M2 monitor, plus a linear mode. The signal delay capability enables user definable settings of up to 10 s (= 3440 m/11286 ft), which can be applied independently to each channel. The same applies to the two 16-band equalizers, providing optional parametric, asymmetric, shelving or notch filtering. The D20 incorporates a colour TFT touchscreen, offering quick access to the menu structure, while the rotary encoder can be used for fine adjustment. The front panel and the integrated touchscreen are tilted up for easy operation when the amplifier is below eye level. The equal ratio of signal input to amplifier output channels increases application flexibility particularly for monitor, frontfill or effect channel use. The LoadMatch function integrated within the D20 amplifier electrically compensates for the properties of loudspeaker cable used. The D20 incorporates Class D amplifiers utilizing a power supply with active Power Factor Correction (PFC) suitable for mains voltages 100 V - 240 V, 50 - 60 Hz and maintains a stable output when used with weak or unstable mains supplies. An NL8 provides all outputs on a single connector for loudspeaker multicores. Dual channel mode is driven through four individual NL4 connectors, while Mix TOP/SUB and 2-Way Active mode output configurations for applicable d&b loudspeakers are available via two central NL4 connectors. etherCON and RJ 45 connectors enable access to the d&b Remote network through OCA/AES70 via Ethernet and through CAN-Bus respectively.

Introductory video

The D20 Touring rack assembly

The D20 Touring rack assembly is designed as a fully equipped and prewired system rack, providing mains power distribution, connector interfaces and all internal cabling for three D20 amplifiers1. It is equipped with a 32 A CEE mains power connector, a mains distribution device with a 32 A mains link, and a loudspeaker connector panel.

All internal audio and remote connections are fully prewired. A loom comprising two AES3 cables and one CAT5/etherCON2 is supplied, providing patch cabling for a network connection and four AES3 channels. The D20 Touring rack assembly is provided with either a DS10 Audio network bridge, which comes supplied with all necessary cabling, or a 1 RU drawer.

The DS10 Audio network bridge interfaces between Dante networks and AES3 digital audio signals, while also providing distribution of Ethernet control data. The DS10 can deliver up to sixteen Dante network channels via AES3 digital signal outputs, and is intended to integrate directly into a D20 Touring rack assembly. The front panel of the DS10 is designed to align with the input panel of the D20 Touring rack assembly. The DS10 can be powered by one of the auxiliary mains outputs. All necessary patch cabling and links are supplied with a D20 Touring rack assembly including a DS10.

The 10 RU Touring rack houses a 19" internal shockmount steel frame accommodating three D20 amplifiers and the requisite connection panels. It comes with two sliding doors, a perspex window at the front, four wheels, six handles and recessed stacking moulds at the top.

The DS10 Rack upgrade kit contains everything required to replace the drawer within the D20 Touring rack assembly with a DS10. This kit includes a DS10 Audio network bridge, a powerCON2 to powerCON2 mains cable, an Ethernet patch cable and two AES3 XLR patch cables.

1 The Touring rack assembly does not come with D20 amplifiers.
2 etherCON® and powerCON® are registered trademarks of Neutrik AG, Liechtenstein.

Architectural specifications for detailed project planning

Do you require architectural specifications? For a d&b system or a specific d&b Series? Here are the most important technical specifications ready for download.

Digital Signal Processing
Equalizer
2 x 16-band PEQ/notch/shelving/asymmetric
Latency analog and digital inputs
0.3 msec.
Delay setting
0.3 - 10000 msec.
Configurations
current d&b loudspeakers (except SL-Series, J-Series, M2) and linear mode
Function switches
d&b loudspeaker specific circuits
Frequency generator
Pink noise or Sine wave
Sampling rate
96 kHz/27 Bit ADC/24 Bit DAC
Controls and indicators
Power
Mains power switch
Scroll/Edit
Digital rotary encoder
Display
Colour TFT touchscreen, 3.5"/320 x 240 pixel
ISP, GR, OVL A/B
Colour TFT
Connectors
INPUT ANALOG (A1 - A4)
3 pin XLR female
ANALOG LINK (A1 - A4)
3 pin XLR male
INPUT DIGITAL (D1/2, D3/4)
3 pin XLR female AES 3
DIGITAL LINK (Output)
3 pin XLR male
Sampling Digital AES/EBU
48 kHz/96 kHz
Speaker outputs A/B/C/D
NL4
Mix TOP/SUB / 2-Way Active output A/B and C/D
NL4
4 Channel output
NL8
CAN
2 x RJ 45 parallel
ETHERNET
2 x etherCON®, 10/100 Mbit Ethernet
Mains connector
powerCON®
Data (linear setting with subsonic filter)
Maximum output power per channel (THD+N < 0.5%, all channels driven)
CF = 6 dB at 4 / 8 ohms
CF = 12 dB at 4 / 8 ohms


4 x 1000/800 W
4 x 1600/800 W
S/N ratio (unweighted, RMS)
Analog input
Digital input

> 104 dBr
> 106 dBr
Power supply
Type
Universal range switch mode power supply with active PFC
Rated mains voltage
100 - 240 V, 50 - 60 Hz
Dimensions / weight
Dimensions (H x W x D)
2 RU x 19" x 460 mm/18.1"
Weight
10.8 kg/23.8 lb

Application information is presented for guidance only. d&b reserves the right to make any necessary changes to the products and the published specifications. As part of the ongoing development program d&b tries to maintain the highest degree of product compatibility.

 
Release
Category
File type
Size
Language
 
NEW D80/D20 Firmware V2.14.01 Release notes
17.10.2018
Firmware and documentation
PDF
91 KB
English
NEW Software Newsletter 2018-10
11.10.2018
Other documentation
PDF
1 MB
English
D20 Manual 1.8 en
31.07.2018
Manuals
PDF
17 MB
English
2D CAD drawings - D20
08.05.2018
CAD Data 2D/3D
ZIP
211 KB
The Amplifiers/Software brochure
06.04.2018
Brochures
PDF
11 MB
English
EU Declaration of Conformity (CE)
06.03.2018
Other documentation
PDF
53 KB
English
Software Newsletter 2017-12
04.12.2017
Other documentation
PDF
1,015 KB
English
Software Newsletter 2017-04
14.06.2017
Other documentation
PDF
924 KB
English
Z5560 D20 Touring Rack CE Manual 1.1
07.02.2017
Manuals
PDF
4 MB
English
Software Newsletter 2016-10
30.09.2016
Other documentation
PDF
2 MB
English
TI 310 Ethernet networking 1.1
05.12.2014
Technical information
PDF
1 MB
English
Device setup: Overview and navigation

1/5 – Device setup: Overview and navigation

Device setup: Input modes

2/5 – Device setup: Input modes

Device setup: Output modes

3/5 – Device setup: Output modes

Device setup: Remote view

4/5 – Device setup: Remote view

Channel setup

5/5 – Channel setup

Similar applications
All categories

d&b applications

Mobile application or fixed installation? Indoors or outdoors? Large or small? d&b provides tailored-made solutions for each and every requirement. What is more, the dedicated simulation software optimizes the planning of the system installation.
view all applications
Looking for a sales contact in your country?find a reseller now