D6 amplifier

D6 amplifier isometric view
D6 amplifier front view
D6 amplifier isometric view
D6 amplifier front view

D6 amplifier

Dual channel amplifier

  • Maximum output power 2 x 600 W into 4 Ω
  • All current d&b loudspeaker setups except J-Series, V-Series, M2, B22-SUB or 2-Way Active mode

Product description

The 2 RU two channel lightweight D6 amplifier delivers medium power into low impedance loads between 4 and 16 ohms and is ideally suited for use in both mobile and installation environments. The D6 contains configurations for d&b loudspeakers and a linear mode; exceptions are 2-Way Active, V-Series and B2-SUB. The signal delay capability enables user definable settings of up to 340 msec (=100 m/328.1 ft) to be applied independently to each channel. The same applies to the 4-band parametric equalizer, providing optional boost/cut or notch filtering. The D6 incorporates a digital rotary encoder and a LCD display to configure the amplifier. The D6 incorporates Class D amplifiers utilizing a switch mode power supply with active Power Factor Correction (PFC), suitable for mains voltages 100 V/120 V/200 V/ 230 V, 50 - 60 Hz and maintains a stable and increased output when used with weak or unstable mains supplies. It is supplied with two NL4 loudspeaker output connectors. RJ 45 connectors enable access to the Remote network via CAN-Bus. d&b System check verifies that the system performs within a predefined condition, whilst d&b Load monitoring enables an automatic and continuous impedance monitoring. Both can determine the status of an LF or HF driver in systems with multiple elements, even if these are crossed over passively.

Architectural specifications for detailed project planning

Do you require architectural specifications? For a d&b system or a specific d&b Series? Here are the most important technical specifications ready for download.

Digital Signal Processing
Equalizer
4-band PEQ/Notch
Latency analog and digital inputs
0.3 msec.
Delay setting
0.3 - 340 msec with 0.1 msec detents
Configurations
Current d&b loudspeakers (except 2-Way Active, V-Series and B2-SUB) and linear mode
Function switches
d&b loudspeaker specific circuits
Frequency generator
Pink noise or Sine wave
Sampling rate
96 kHz/27 Bit ADC/24 Bit DAC
Controls and indicators
Power
Mains power switch
Scroll/Edit
Digital rotary encoder
Display
Liquid Crystal Display (LCD)/120 x 32 pixel
ISP, GR, OVL A/B
LED indicators
Connectors
INPUT ANALOG (A1 - A4)
3 pin XLR female
ANALOG LINK (A1 - A4)
3 pin XLR male
INPUT DIGITAL (D1, D2)
3 pin XLR female AES 3
DIGITAL LINK (Output)
3 pin XLR male
Sampling Digital AES/EBU
48 kHz/96 kHz
Sampling rate
48 kHz/96 kHz
OUT CHANNEL A/B
NL4
REMOTE
2 x RJ 45 parallel, CAN-Bus
SERVICE
USB type B
Mains connector
powerCON®
Data (linear setting with subsonic filter)
Maximum output power per channel (THD+N < 0.5%, all channels driven)
CF = 6 dB at 4 / 8 ohms
CF = 12 dB at 4 / 8 ohms


2 x 600/350 W
2 x 600/350 W
S/N ratio (unweighted, RMS)
> 110 dBr
Power supply
Type
Autosensing switch mode power supply with active Power Factor Correction (PFC)
Rated mains voltage high range
208 - 240 V, 50 - 60 Hz
Rated mains voltage low range
100 - 127 V, 50 - 60 Hz
Dimensions / weight
Dimensions (H x W x D)
2 RU x 19" x 353 mm/13.9"
Weight
8 kg/17.6 lb
Similar applications
All categories

d&b applications

Mobile application or fixed installation? Indoors or outdoors? Large or small? d&b provides tailored-made solutions for each and every requirement. What is more, the dedicated simulation software optimizes the planning of the system installation.
view all applications
Looking for a sales contact in your country?find a reseller now