Large format flyable cardioid subwoofer
- Components 3 x 18"
- Dispersion Cardioid
- max SPL 139 dB
- Weight 106 kg / 234 lb
The J-SUB is an actively driven 2-way bass-reflex design housing three long excursion neodymium 18" drivers, two drivers face to the front and one driver to the rear. The cardioid dispersion pattern resulting from this approach avoids unwanted energy behind the system, which greatly reduces the reverberant field at low frequencies and provides the greatest accuracy of low frequency reproduction. J-SUB cabinets can be used to supplement J8 and J12 loudspeakers in various combinations, ground stacked or flown, either integrated on top of a J8 / J12 array or as a separate column. The J-SUB cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front and rear of the loudspeaker cabinet are protected by a rigid metal grill and the side panels incorporate eight handles. Four 100 mm wheels and one EP5 or NL8 connector are mounted at the rear.
The d&b D80 and 30D amplifiers are recommended to drive the J-SUB. The 2-Way active mode for the J-SUB requires two channels of the D80.
Architectural specifications for detailed project planning
Do you require architectural specifications? For a d&b system or a specific d&b Series? Here are the most important technical specifications ready for download.
138 dB SPL
139 dB SPL
optional 1 x EP5 or 1 x NL8
21.3 x 43.3 x 37.23 / 41.8"
1 SPL max peak test signal: pink noise with crest factor 4
2 dimensions without wheels
Application information is presented for guidance only. d&b reserves the right to make any necessary changes to the products and the published specifications. As part of the ongoing development program d&b tries to maintain the highest degree of product compatibility.