DS10 Audio network bridge

DS10 audio network bridge front view
DS10 audio network bridge isometric view
DS10 audio network bridge rear view with output channels
DS10 audio network bridge front view
DS10 audio network bridge isometric view
DS10 audio network bridge rear view with output channels

DS10 Audio network bridge

Interface between d&b amplifiers and the Dante audio transport protocol

  • 16 AES3 digital output channels
  • 4 AES3 digital input channels
  • Integrated 5-port network switch

Product description

The DS10 Audio network bridge interfaces between Dante networks and AES3 digital audio signals, while also providing distribution of Ethernet control data. Positioned within the signal chain in front of the amplifiers, this 1 RU device expands the d&b system approach in both mobile and installation environments. Each unit can deliver up to sixteen Dante network channels via AES3 digital signal outputs. The AES3 channel streams from the DS10 carry meta data with Dante channel labels and cabling information to the four channel d&b amplifiers. Additionally, four AES3 input channels provide access to the Dante audio network for applications such as a break-in from a Front of House console.

The DS10 incorporates an integrated 5-port switch, offering a primary and redundant network for the Dante protocol, as well as advanced functions such as Multicast Filtering and VLAN modes. This extensive switch flexibility provides extended connectivity for a laptop to control the d&b amplifiers using the R1 Remote control software via the OCA/AES70 (Open Control Architecture) protocol. Using the DS10 Audio network bridge, audio signals and remote control data can be combined using a single Ethernet cable. The front panel of the DS10 is designed to match the I/O panel of the D80 Touring rack assembly. This ensures a simple integration within existing system configurations. The DS10 features a power supply suitable for mains voltages 100 V – 240 V, 50 – 60 Hz, with Overvoltage protection of up to 400 V.

Architectural specifications for detailed project planning

Do you require architectural specifications? For a d&b system or a specific d&b Series? Here are the most important technical specifications ready for download.

Controls and indicators
BYPASS/NETWORK
Toggle switch
Switch port modes/Audio loss
LED indicators
SYNC ERROR
Red LED indicator
SUBSCRIBED (RX Subscription)
Green LED indicator
Digital inputs
DIGITAL IN
3 pin XLR female AES3
Sampling
32 - 192 kHz
Synchronization
Sample Rate Converter (SRC)
Digital outputs
DIGITAL OUT
3 pin XLR male AES3
Sampling
48 / 96 kHz
Synchronization
Dante network
Network
Connectors
etherCON®
built-in 5-port Ethernet switch
100/1000 Mbit
Operating conditions
Temperature range
0 °C ... 40 °C / 32 °F ... 104 °F
Storage temperature
–20 °C ... 70 °C / –4 °F ... 158 °F
Humidity (rel.), long term average
70%
Power supply
Mains connector
powerCON®
Overvoltage protection
Up to 400 VAC
Rated mains voltage
100 - 240 V, 50 - 60 Hz
Dimensions / weight
Dimensions (H x W x D)
1 RU x 19“ x 232 mm
Weight
3.75 kg / 8.26 lb
Similar applications
All categories

d&b applications

Mobile application or fixed installation? Indoors or outdoors? Large or small? d&b provides tailored-made solutions for each and every requirement. What is more, the dedicated simulation software optimizes the planning of the system installation.
view all applications
Looking for a sales contact in your country?find a reseller now

More of Processing & Matrix