2-way stage monitor
- Components 15"/1.4"
- Dispersion 75°
- max SPL 135 dB
- Weight 23 kg / 50 lb
The 2-way passive MAX2 loudspeaker houses a 15” LF driver and a coaxially mounted 1.4” HF compression driver and achieves 75° conical constant directivity dispersion. The driver arrangement uses a single magnet assembly, allowing for a compact cabinet design with a low profile for strict visual demands. The MAX2 provides a broad variety of deployment possibilities, whether used individually as a stage monitor; as a stand-alone full range system or, when combined with d&b subwoofers, as a drumfill. The loudspeaker cabinet is constructed in marine plywood with an impact resistant paint finish. Four M10 threaded inserts allow connection to a flying bracket. The cabinet incorporates a pair of recessed grips for handling, while the front is protected by a rigid metal grill backed with an acoustically transparent foam. A pole mount is incorporated into one of the side panels. Two runners recessed in the bottom panel protect the cabinet from scratching and prevents movement.
The d&b D20 and 30D amplifiers are recommended to drive the MAX2. The d&b D80, 10D and D6 can also be used. The recommended amplifiers for the MAX2 are the D20 and 30D. Alternatively, the MAX2 can be driven with using the MAX2 configuration within the D6, D80 or 10D amplifiers. The MAX2 may also be driven with any high quality linear power amplifier with an output not exceeding 800 Watts into 8 ohms and with an additional 25 Hz, 12 dB/octave subsonic filter.
Architectural specifications for detailed project planning
Do you require architectural specifications? For a d&b system or a specific d&b Series? Here are the most important technical specifications ready for download.
coaxial 1.4" exit compression driver
passive crossover network
optional 2 x EP5 or 2 x NL4
14 x 22.8 x 19.5"3
1 with floor coupling
2 SPL max peak test signal: pink noise with crest factor 4
3 overall dimensions (projected footprint)
Application information is presented for guidance only. d&b reserves the right to make any necessary changes to the products and the published specifications. As part of the ongoing development program d&b tries to maintain the highest degree of product compatibility.